Beesource Beekeeping Forums banner
1 - 1 of 1 Posts

4 Posts
Discussion Starter · #1 ·
Hi all, eager first time poster that is getting into this amazing hobby!
I’m having a wax dipping tank built that is 24”wide x 24” deep x 36” tall. It will have a drain on one side so I can drain and strain the wax if debris gets into it and an overflow on the other side that lets me hang a bucket to catch any foam over to try to prevent a fire (got that idea from someone that had posted here). It will also have a heat shield. I know it’s not as big as some but would allow me to do 3 supers and a base at the same time by my calculations, which would be plenty every 10 minutes. I plan on dipping for local beekeepers around Kansas City. I’m currently working on figuring out the proper burner setup for it to be efficient and plan on using a 100# propane tank to prevent the tank freezing that some encounter.
My question is in regards to the wax. I plan on using paraffin and microcrystalline at 3:1 I believe? Is that a proper ratio? And where would be the best place to look for them? By my calculations to make it 20” deep I would need around 390 pounds total. Thanks ahead for reading this!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.