Beesource Beekeeping Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi Beekeepers & Queenbreeders

This is my first post in this forum I hope it is helpful or at least interesting for someone.

I wrote an article on my website about a selfmade very accurate PID temperature controller with webgui. I hope I am not breaking any rules when I link to the article here.

https://bienen.newtechcloud.ch/inkubator-steuerung-inkupi-3-mit-brewblox/


Here are some features of the controller:

- accuracy / stability +- 0.05°C.....
- Webgui and Webserver with Raspberry Pi
- Data Logging
- possibility to control several incubators or cooling units with the same controller

The controller is built with parts that are normally used for brewing beer. BrewPi/BrewBlox
The article is written in german, deepl.com is your translator friend

Here a picture of my newest Incubator Setting:

InkuPi3_Steuerung.jpg

Regards, Mario

Translated with www.DeepL.com/Translator (free version)
 

·
Registered
Joined
·
2,768 Posts
I'd love to read your web page, but mein Deutch nicht est goot (My German is not good). Could you get a friend or other bilingual beekeeper to translate this article into English (British, American, Australian, or other dialect does not matter)? I could also easily read it in Spanish.

Thank you! Danke! :)
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Hi kilocharlie

I feel similar when I read English articles. I use the website deepl.com if I do not understand everything. The translations are mostly good!
So if you don't have a friend who translates the article from german to english try deepl.com ;)
 
1 - 4 of 4 Posts
Top