Incubator Controller InkuPi 3 DIY
Hi Beekeepers & Queenbreeders
This is my first post in this forum I hope it is helpful or at least interesting for someone.
I wrote an article on my website about a selfmade very accurate PID temperature controller with webgui. I hope I am not breaking any rules when I link to the article here.
Here are some features of the controller:
- accuracy / stability +- 0.05°C.....
- Webgui and Webserver with Raspberry Pi
- Data Logging
- possibility to control several incubators or cooling units with the same controller
The controller is built with parts that are normally used for brewing beer. BrewPi/BrewBlox
The article is written in german, deepl.com is your translator friend
Here a picture of my newest Incubator Setting:
Translated with www.DeepL.com/Translator (free version)