Sideliner preferred way to render beeswax?
Results 1 to 8 of 8
  1. #1
    Join Date
    Jun 2015
    Location
    Schoharie, NY
    Posts
    133

    Default Sideliner preferred way to render beeswax?

    Steam, solar, double boiler, electric? What are your methods? I've been double boiling and I'm trying to find a better and faster way. Anyone have a good build out or another thread they can recommend? Thanks all!

  2. Remove Advertisements
    BeeSource.com
    Advertisements
     

  3. #2
    Join Date
    Jun 2015
    Location
    Schoharie, NY
    Posts
    133

    Default Re: Sideliner preferred way to render beeswax?

    Also I typically have to render 4-5 times through cheese clothe to get clean wax. Which method yields the cleanest wax? How many runs are needed? I'm seeing a lot of wall paper steamers and stuff but I want to render 5 - 20 gallons of wax capping and comb at a time

  4. #3
    Join Date
    Nov 2018
    Location
    Central PA, USA
    Posts
    30

    Default Re: Sideliner preferred way to render beeswax?

    I have the same questions.

  5. #4
    Join Date
    Jan 2013
    Location
    Lumpkin County, GA
    Posts
    851

    Default Re: Sideliner preferred way to render beeswax?

    With my capping wax, I put it twice through the solar melter in August. The first run through, I just add the capping wax to the melter and collect the melted wax in a loaf pan filled with a little water. The second time, I remove the wax from the loaf pan and put it back in the solar melter on top of a paper towel. Most large debris sticks to the paper towel and the cleaner wax collects in the loaf pan. Next I melt the wax in a double boiler and run it through several thicknesses of cheesecloth. I collect the wax in smaller pucks as it runs out of the cheesecloth. If I still see debris in the wax after it cools, I will melt it one more time in the double boiler and run it through several more thicknesses of cheesecloth. By that time the wax is clean.
    Most people say to pitch the brood comb but I hate wasting any wax. Brood comb wax takes quite a bit more processing. I add my brood comb to the solar melter and collect the easy wax in the loaf pan. The comb that remains in the melter is collected and put into T-shirts. I use a homemade wax press with boiling water to squeeze the remaining wax from the comb in the T-shirt. The boiling water drains into a bucket where it cools and the wax is collected. I run the collected wax through the solar melter on top of paper towels a few times to catch most of the big debris. Then I use the double boiler to filter the wax 3 times through cheesecloth. Even filtered, the brood wax is still much more yellow than capping wax. I guess that is due to pollen grains that are too small to get filtered by the cheesecloth.

  6. #5
    Join Date
    Jun 2016
    Location
    Woodbridge, VA (But planning to move to NW Louisiana soon)
    Posts
    279

    Default Re: Sideliner preferred way to render beeswax?

    I got a large oval crock pot for $3 from the Thrift Store. Pack it full of comb, add a couple cups of water, and in a hour or 90 minutes, it's melted. Pour it through a tight cotton cloth- old tshirt, pillow case, sheet, etc. Wear thick rubber gloves and squeeze/wring the cloth to get as much wax as possible out of the old brood cases.
    I use silicon microwave baking pans to pour the melted wax into, it gives me nice blocks of wax.

  7. #6
    Join Date
    May 2015
    Location
    Skaneateles, NY
    Posts
    938

    Default Re: Sideliner preferred way to render beeswax?

    i just use the maxant wax melter. Ive only done it the last 2 years as i didnt really have enough wax to process prior to that. Typically takes twice through the melter and strained through cheese cloth to come out clean.
    You can fit a ton of wax in the melter and all the crapola separates from the honey and wax easily before you strain it out through the cloth.
    Brood wax doesnt end up the same bright yellow color as capping wax for me though. Still clean with no debris just a darker color.

  8. #7

    Default Re: Sideliner preferred way to render beeswax?

    A old kelly mellter for me. For the sec round A deep fryer with a valve welded onto the low side. Mainly for cappings

  9. #8
    Join Date
    Jun 2015
    Location
    Schoharie, NY
    Posts
    133

    Default Re: Sideliner preferred way to render beeswax?

    Thanks to all who replied. I've been thinking more and more, and my idea is this for a steam wax melter (inspiration from youtube):

    A water tank or 55 gal drum held over a wood fire with a hose running from the top of the water tank to the bottom of a cappings tank (or stack of bee boxes if doing comb). Inside the capping tank would be a pillow case or the like, full of cappings and comb, which would then drip down and collect underneath. Has anyone built anything similar to this?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •