Pro Vap 110
Results 1 to 13 of 13

Thread: Pro Vap 110

  1. #1
    Join Date
    May 2014
    Location
    Gainesboro, Tennessee
    Posts
    910

    Default Pro Vap 110

    Hey all,

    Just got one of these new pro vaps today and i got to say by the videos and the (now) eye test I am impressed. That is until you look at the poor solder job on the inside.

    I really think this could be a fine tool if the electronics are made to last. Mine will not turn on. Before you ask, I run my commercial table saw off of that same 110 outlet.

    Has anyone else had issues with the electronics on these things? Mine will blink on sometimes and then go right off.
    Follow our videos and photos below. https://www.facebook.com/pages/Tenne...35936049943850

  2. Remove Advertisements
    BeeSource.com
    Advertisements
     

  3. #2
    Join Date
    Apr 2014
    Location
    Powhatan, Virginia, USA
    Posts
    241

    Default Re: Pro Vap 110

    Mine works fine, get in touch with Larry and he will make it right

  4. #3
    Join Date
    Jun 2013
    Location
    Rensselaer County, NY, USA
    Posts
    4,262

    Default Re: Pro Vap 110

    I second that! If there is any problem with one of Larry's devices, that's the first thing to do. And from my own experience with his outstanding customer service, I would bet that will resolve any issues you have.

    Nancy

  5. #4
    Join Date
    Dec 2008
    Location
    syracuse n.y.
    Posts
    4,680

    Default Re: Pro Vap 110

    Quote Originally Posted by Tennessee's Bees LLC View Post
    I am impressed. That is until you look at the poor solder job on the inside.
    I have to admit, if I was SNL and I read the above, and you were trying to get it fixed, I would probably be a little reluctant to cover the fixes, was it working before you took it apart
    mike syracuse ny
    Whatever you subsidize you get more of. Ronald Reagan

  6. #5
    Join Date
    Nov 2009
    Location
    Manning, SC
    Posts
    4,840

    Default Re: Pro Vap 110

    Quote Originally Posted by Tennessee's Bees LLC View Post
    Hey all,

    Just got one of these new pro vaps today and i got to say by the videos and the (now) eye test I am impressed. That is until you look at the poor solder job on the inside.
    I have to question why you took it apart. The chamber holding the electronics is glued together. Call, email, PM me to discuss.
    Last edited by snl; 02-13-2018 at 01:13 PM.
    http://OxaVap.com Your source for the ProVap 110
    OA Vaporizer. The fastest vaporizer on the market!

  7. #6
    Join Date
    Apr 2014
    Location
    Powhatan, Virginia, USA
    Posts
    241

    Default Re: Pro Vap 110

    My impression is that the op was talking about the solder connection of the tube to the acid chamber, if he opened the electronics that is between him and Larry. They can sort it out.

  8. #7
    Join Date
    May 2015
    Location
    Chico, California
    Posts
    214

    Default Re: Pro Vap 110

    Just received mine. Plugged a converter into cig lighter and worked great! My truck, the giant generator..

  9. #8
    Join Date
    May 2014
    Location
    Gainesboro, Tennessee
    Posts
    910

    Default Re: Pro Vap 110

    Of course, it did not work before I opened it. I was planning on vaporizing with it not looking at the inside of something I know nothing about.

    I didn't get it from SNL. I wasn't trying to make any slant towards him. Even if I had, he didn't make it.

    Also there is a video on the site about how to change the thing out so it is made to be opened and replaced. My thoughts are how often will I have to?

    Mann lake is sending me a replacement. I just should have ordered earlier in the year to avoid a situation like this.
    Follow our videos and photos below. https://www.facebook.com/pages/Tenne...35936049943850

  10. #9
    Join Date
    Nov 2009
    Location
    Manning, SC
    Posts
    4,840

    Default Re: Pro Vap 110

    Quote Originally Posted by Tennessee's Bees LLC View Post
    Of course, it did not work before I opened it. I was planning on vaporizing with it not looking at the inside of something I know nothing about.

    I didn't get it from SNL. I wasn't trying to make any slant towards him. Even if I had, he didn't make it.

    Also there is a video on the site about how to change the thing out so it is made to be opened and replaced. My thoughts are how often will I have to?

    Mann lake is sending me a replacement. I just should have ordered earlier in the year to avoid a situation like this.
    The video on the site shows how to replace the temperature control screen within the chamber, not open the chamber itself. That screen just slips in and out of the electronics chamber. You should never have to replace it, but "stuff" happens and will be remedied.
    http://OxaVap.com Your source for the ProVap 110
    OA Vaporizer. The fastest vaporizer on the market!

  11. #10

    Default Re: Pro Vap 110

    SNL are you going to be at Tri county meeting in Ohio

  12. #11
    Join Date
    Nov 2009
    Location
    Manning, SC
    Posts
    4,840

    Default Re: Pro Vap 110

    Quote Originally Posted by My-smokepole View Post
    SNL are you going to be at Tri county meeting in Ohio
    Thatís the plan!
    http://OxaVap.com Your source for the ProVap 110
    OA Vaporizer. The fastest vaporizer on the market!

  13. #12

    Default Re: Pro Vap 110

    I will see you there.

  14. #13
    Join Date
    May 2014
    Location
    Gainesboro, Tennessee
    Posts
    910

    Default Re: Pro Vap 110

    Mann lake sent me a new one. Plugged it in, works well. Vaporizing to commence.....
    Follow our videos and photos below. https://www.facebook.com/pages/Tenne...35936049943850

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •