Page 3 of 3 FirstFirst 123
Results 41 to 55 of 55

Thread: Painting

  1. #41
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,673

    Default Re: Painting

    I would like to thin my Valspar a little to paint the corners and handholds. What should I use? Water? Will a cpl coats of thinned Valspar penetrate the end grain better?
    Mark Berninghausen To combat Ebola, please consider supporting http://www.doctorswithoutborders.org


  2. #42
    Join Date
    Feb 2013
    Location
    Lee,AL,USA
    Posts
    83

    Default Re: Painting

    Quote Originally Posted by sqkcrk View Post
    I would like to thin my Valspar a little to paint the corners and handholds. What should I use? Water? Will a cpl coats of thinned Valspar penetrate the end grain better?
    It should have a statement on the back of the bucket about proper thinning.

  3. #43
    Join Date
    Feb 2013
    Location
    Lee,AL,USA
    Posts
    83

    Default Re: Painting

    Quote Originally Posted by sqkcrk View Post
    I use Valspar lately and boy do they stick together. Stacking them outdoors and leaving them in the weather a while seems to let them break their bond. Though that could just be my imagination.
    I also have this issue. I have been told that if the paint sticks it has not fully cured.

  4. #44
    Join Date
    Aug 2013
    Location
    Santa barbara, CA
    Posts
    175

    Default Re: Painting

    I use the Behr Marquee and even after a week of drying it will still stick together (It would make a fine glue). I rub both top and bottom edges with a pound block of beeswax, works great.
    Last edited by dynemd; 07-16-2014 at 11:18 PM. Reason: spelling
    If you only have a hammer, you tend to see every problem as a nail.
    Abraham Maslow

  5. #45
    Join Date
    Apr 2014
    Location
    Berkeley Co., SC
    Posts
    16

    Default Re: Painting

    intheswamp, yeah I'm talking about on the hive. I use valspar. To paint I separate the boxes with 1 bys cut to fit the frame perch. I have about a 1/2" gap between the boxes. Some paint does get on the
    mating edges. It sticks almost as good as glue. I like the idea of the bees wax. I tried crisco on the edges and it helps. Wax sounds like a better way.

  6. #46
    Join Date
    Apr 2012
    Location
    Loup City, NE
    Posts
    190

    Default Re: Painting

    If you guys are INTENT upon finishing those edges see post #10.

  7. #47
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,673

    Default Re: Painting

    Right, Woodlife. $16.00/gallon at Ace Hardware.
    Mark Berninghausen To combat Ebola, please consider supporting http://www.doctorswithoutborders.org


  8. #48
    Join Date
    Jul 2011
    Location
    Crenshaw County, Alabama
    Posts
    2,001

    Default Re: Painting

    Quote Originally Posted by CtyAcres View Post
    sqkcrk- Have your son put a second coat on those boxes or you'll regret it. Also Zinsser manufactures the product
    Woodlife that I use, you can't beat that for a seal coat before you stain or when finishing with a coat of paint.
    Wood Life has excellent sealing properties for soaking those corners.
    PS Wood life only costs about $16/gal at Ace Hardware I believe.
    Ok, I went back and looked for it but could not find anything with "Woodlife" and "Zinsser" in its name.

    Is this the same "Woodlife" that you're talking about? I see it associated with Rustoleum, Wolman and DAP,...
    http://www.rustoleum.com/~/media/Dig...ive%20TDS.ashx


    Besides for priming bee boxes, I'm really interested in this as opposed to Zinsser primer for an old house with some badly weathered/dry woodtrim that I need to paint. Anybody want to help?

    Btw, they recommend three coats for edges.

    Ed

  9. #49
    Join Date
    Apr 2012
    Location
    Loup City, NE
    Posts
    190

    Default Re: Painting

    ED- Yes that is the stuff. Zinsser name is on the back of that can. Zinsser kept lots of trade
    names in place on the market.

  10. #50
    Join Date
    Feb 2013
    Location
    Lee,AL,USA
    Posts
    83

    Default Re: Painting

    Quote Originally Posted by Intheswamp View Post
    Anybody want to help?

    Ed
    Only if it pays in bees!

  11. #51
    Join Date
    Apr 2011
    Location
    Redwood City, CA
    Posts
    88

    Default Re: Painting

    And don't use a airless spray rig, you have to put 3 or 4 coats of spray to equal 1 or 2 coats
    of paint, hand brushed.
    Sorry, this is untrue. I used to be a licensed paint contractor.

    If you have a sprayer, use it. Be sure to backroll on your first coat to get all the paint into the wood. It's dry and thirsty. And yes, the corners are very important to backroll. Sometimes I backroll corners the second time around. But for the flat sides, once you've backrolled once, you are good to spray, using a 50% overlap technique. You will get all the coverage you need. It's a falsity that you want super thick paint; you want the proper amount so it can do its job.

  12. #52
    Join Date
    Jun 2010
    Location
    Kingsport, Sullivan, Tennessee
    Posts
    787

    Default Re: Painting

    Quote Originally Posted by TVBeek View Post
    When using exterior latex, has anyone experienced having the paint on the box mating edges stick together? I'm talking to the degree that separation is difficult. Is there a remedy?
    I used to have that happen every time, but no more. Now, before I put the box into service, I rub beeswax along the top and bottom. they no longer stick to each other. -james

  13. #53
    Join Date
    May 2010
    Location
    Spokane, Washington, USA
    Posts
    738

    Default Re: Painting

    Just a tip. Floetrol is a great product for thinning latex paints.

  14. #54
    Join Date
    Feb 2000
    Location
    Hammond, NY
    Posts
    53

    Default Re: Painting

    dose any one wax dip there equipment

  15. #55
    Join Date
    Aug 2002
    Location
    Nehawka, Nebraska USA
    Posts
    46,341

    Default Re: Painting

    >dose any one wax dip there equipment

    I do.

    http://www.bushfarms.com/beesdipping.htm
    Michael Bush bushfarms.com/bees.htm "Everything works if you let it." ThePracticalBeekeeper.com 40y 200h 37yTF

Page 3 of 3 FirstFirst 123

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads