Results 1 to 15 of 15

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    Cheyenne, Wyoming, USA
    Posts
    1,693

    Default Is there interest out there for pallet clips to accomodate telescoping covers?

    Hey all,
    I am about to start manufacturing W clips to accommodate telescoping covers. Is there interest out there for these? THIS IS NOT AN ADVERTISEMENT!!! Any interest will not be taken as commitment, just feeling the opportunity. So, what'dya think?

  2. #2
    Join Date
    Jul 2011
    Location
    Belgrade, MT
    Posts
    74

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    I would love some. Would like to have a little more space between boxes. I have made pallets to hold 2 hives for my small operation. Thanks for considering this.
    Peter W., Belgrade, MT, Elv. 4420 Zone 4a
    Sheepshank Honey, 4 yrs & 27 hives

  3. #3
    Join Date
    May 2013
    Location
    Port Austin, Michigan
    Posts
    61

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    I would like some.

  4. #4
    Join Date
    Apr 2009
    Location
    Issaquah,WA,USA
    Posts
    2,394

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    No, that wont work well. When you put them on a truck they will tip toward each other due to the space. I seriously doubt you will find commercial guys that would make the change so your market is really small. Commercial guys don't use telescoping covers. And non most hobbyist don't use pallets. Not a very good combination in my opinion.

  5. #5
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,629

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Not much. I know one guy who used them. I think we talked him into getting rid of them and going w/ what everyone else uses. A tighter load w/ the standard U or W clips. What's the advantage of a telescoping cover?
    Mark Berninghausen To combat Ebola, please consider supporting http://www.doctorswithoutborders.org


  6. #6
    Join Date
    May 2012
    Location
    Cheyenne, Wyoming, USA
    Posts
    1,693

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Myself, I much prefer using standard W clips. I just thought of making some to accommodate tele-covers because I have been hearing a demand for them.

  7. #7
    Join Date
    May 2012
    Location
    Cheyenne, Wyoming, USA
    Posts
    1,693

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Here is how they work.
    clip2.jpg

  8. #8
    Join Date
    Apr 2009
    Location
    Issaquah,WA,USA
    Posts
    2,394

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    So do hobbyist use pallets? I did not start until I bought a swinger. Can't imagine to many hobbyists have forklifts at that level. I would assume that a hobbyist would use a boom. Commercail guys would not want the extra expense and trouble of an inner-cover.

    If you are moving your bee's lets say to almonds I think the brokers would not like the telescoping covers.

    But, if you are making them to order then I guess go for it. I would hate to encourage some one to build there operation on this standard and have to change at a large number if they are growing to do pollination.

    But, what do I know.

  9. #9
    Join Date
    May 2012
    Location
    Cheyenne, Wyoming, USA
    Posts
    1,693

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Quote Originally Posted by EastSideBuzz View Post
    When you put them on a truck they will tip toward each other due to the space. I seriously doubt you will find commercial guys that would make the change so your market is really small.
    I don't anticipate any large market whatsoever, and in fact am not prepared for a large demand. As far as tilting in, it shouldn't happen because the covers fit fairly snugly in the gap. Pictures in next post.

  10. #10
    Join Date
    Dec 2008
    Location
    Solano, California, USA
    Posts
    1,378

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Quote Originally Posted by westernbeekeeper View Post
    Hey all,
    I am about to start manufacturing W clips to accommodate telescoping covers. Is there interest out there for these? THIS IS NOT AN ADVERTISEMENT!!! Any interest will not be taken as commitment, just feeling the opportunity. So, what'dya think?

    Ok Ben, I'm going to cut to the chase. Forget it. Little benefit and lots of issues down the line. A big LOT at that. You will be extremely sorry you WASTED your time ( and money) on this. Its one of those things in commercial beekeeping that if it was practical it would have been done long before you were born. Load a hundred semi's with these things and you will commit suicide rather than do #101. Before you go down this road I would put my ****** on an swinger or bobcat for a few loads and then rethink about two seconds as to why I need to go on to my next project and leave this on the history pile of just dumb ideas brought on by no experience.

  11. #11
    Join Date
    May 2012
    Location
    Cheyenne, Wyoming, USA
    Posts
    1,693

    Default Re: Is there interest out there for pallet clips to accomodate telescoping covers?

    Thanks Phil!!! Advice taken and heeded. I was already starting to doubt my sanity.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads