Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Oct 2011
    Location
    Edmonton, Alberta, Canada
    Posts
    642

    Default Plans for 6 Frame NUC

    Had problems with other NUCs I was using, so here's my protype.

    Storing extracted frames in it, hence the two drone comb frames, so please don't jump all over me!!!!!!!!!!!.

    P1010226.jpgP1010224.jpgP1010225.jpg

    1/2 inch plywood throughout. Outside dimensions are 20 1/8 long, 9 13/16 wide and 11 tall.

    Wall to wall inside is 8 3/4. Used a 1/2 inch full size plywood(less 1/2 for bottom entrance on front) to create the rails and top with a metal ledge. Had to try out the new metal brake!!

    Rail is down 11/16 so don't roll any bees when slide inner cover back on.

    Entrance reducer is two sided, reversalble. Either open or can be fully closed.

    Lip on outer cover is 2 inch deep and doesn't slide off easily. Outer cover lip is just above hand rails on ends, so can easily grasp top of outer cover with thumb and carrying rail with fingers when moving.

    Bottom entrance is 1/2 high.
    If you always do what you always did, you'll always get what you always got!

  2. #2
    Join Date
    Mar 2013
    Location
    Taylor County, Georgia, USA
    Posts
    713

    Default Re: Plans for 6 Frame NUC

    Looks pretty slick. What's your reasoning behind using 6 frames?
    Try it. What could happen?

  3. #3
    Join Date
    Oct 2011
    Location
    Edmonton, Alberta, Canada
    Posts
    642

    Default Re: Plans for 6 Frame NUC

    My preference and I know 4 and 5's are the norm.

    1. If I do a 4 or a 5, it is not long at all until it needs to be moved into a 10.

    2. Not as big a transition to a 10 frame deep, as initially now only four new frames. Bees population better fits size of cavity.

    3. Gives me flexibility to add further frames of brood from a strong hive over time to NUC and when NUC is ready for a super, it is off to a strong start.

    I know the design is not earth shattering concepts but the concepts can be incorporated into 4 and 5 frame NUCs.
    Last edited by mgolden; 09-11-2013 at 04:11 PM.
    If you always do what you always did, you'll always get what you always got!

  4. #4
    Join Date
    Jul 2013
    Location
    Morro Bay, California, USA
    Posts
    705

    Default Re: Plans for 6 Frame NUC

    My preference is for Ply sides (and scrap will do) and have solid wood for front and back.
    I use 1x8 (net 7.5") fence boards, but any solid wood will do.
    Reason:
    1) dimensions front to back are exactly the same as Lang and there are no special extensions or laps- Migratory Tops and bottoms are interchaneable.
    2) Two 5-frame nucs can be sistered up on single bottom board.
    3) Screws hold better into solid end grain than splitting and separating endgrain ply.
    4) Fewer pieces -- 2 sides, 2 fronts, 2 tops, 4 2x2 blocks to reinforce migratory top.
    5. Tie everything up with a piece of clothesline -- Box holds tight, but opens up without unscrewing pieces.

    I build migratory style tops, which also function as bottoms. No special design change. Entrance is a drilled hole. Hole is at the shoulder of the frames, and slightly off center so the hole lines up with frame to frame gap. The hole is easier to definitively screen when you want to move the nuc.




  5. #5
    Join Date
    Jul 2008
    Location
    Spartanburg South Carolina
    Posts
    144

    Default Re: Plans for 6 Frame NUC

    I have been using 6 frame nuce for about six years.if you split them up you can split into two eight frame hives or split them into another nuce .with a good queen fast yard build up for bees works good for me

  6. #6
    Join Date
    Apr 2013
    Location
    Nevada, MO
    Posts
    204

    Default Re: Plans for 6 Frame NUC

    A six frame medium seems like a good idea for those of us usinig all mediums. Or is that still too small?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads