Results 1 to 11 of 11

Hybrid View

  1. #1
    Join Date
    Mar 2013
    Location
    Shickshinny, Pennsylvania
    Posts
    727

    Default Shims for heatwave

    Can I put shims under the inner cover its not protected by the top cover as I have a empty med. on for feeding . , I already have my top cover shimmed and a small top entrance in the inner cover , there still bearding .

  2. #2
    Join Date
    May 2012
    Location
    Rockford, MI
    Posts
    2,086

    Default Re: Shims for heatwave

    Sounds like you have enough ventillation. It hot out here 96 last I knew. Bees beard. They will bee ok.
    Last edited by honeyman46408; 07-15-2013 at 07:59 PM.

  3. #3
    Join Date
    Jan 2009
    Location
    Grosse Ile, Michigan, USA
    Posts
    2,768

    Default Re: Shims for heatwave

    I was pondering putting some shims between my inner and outer covers the other day before this heatwave and never got it done. It's sunny and smokin' hot and humid out there right now, tried checking a few hives in the home yard a few minutes ago and thought I was going to drown in sweat, just couldn't take any more after about 20 minutes. The bees are bringing in lots and lots of nectar though, it was shaking out of the combs in large amounts, nice to see after all that rain we had for 3 weeks. John

  4. #4
    Join Date
    Mar 2013
    Location
    Shickshinny, Pennsylvania
    Posts
    727

    Default Re: Shims for heatwave

    Thanks Beeman I was thinking rain could get in and they might just seal it up anyway and I'm making it open for any ants or bugs out there to get in and I'm changing the bee space . I can't figure out how to cool them down . How the heck do they survive in the south !

  5. #5
    Join Date
    Mar 2013
    Location
    Oxford, Maine
    Posts
    144

    Default Re: Shims for heatwave

    Not sure if this will help but the oval hole in my inner cover which many have is screened over and that especially helps now in this heat because the outer cover is propped

    up in the back by a 1" square piece of wood running the width of the cover making a nice top vent. 95* today and no bearding.

  6. #6
    Join Date
    Mar 2013
    Location
    Shickshinny, Pennsylvania
    Posts
    727

    Default Re: Shims for heatwave

    Woodsy ,I have 3/4'' shims on both sides of my outer cover so its lifted up evenly and I do have the oval hole also , will that work as good as the prop .

  7. #7
    Join Date
    Mar 2013
    Location
    Oxford, Maine
    Posts
    144

    Default Re: Shims for heatwave

    Seems like it should be venting with that setup.
    The other thing i didn't mention is there is good draft from the bottom of my hives using screened bottom boards
    with the pullout tray opened a couple-three inches. That might be making a nice draft upward too.

  8. #8
    Join Date
    Aug 2012
    Location
    Ottawa, Ontario
    Posts
    18

    Default Re: Shims for heatwave

    Hey guys,
    This summer I placed a 1"x4" piece of strapping between my inner cover and outer cover, at the back. Great ventilation plus it angles your outer cover which drains any rain away. Simple application, but bear in mind we don't have beetles or wax moths either.


    Quote Originally Posted by woodsy View Post
    Not sure if this will help but the oval hole in my inner cover which many have is screened over and that especially helps now in this heat because the outer cover is propped

    up in the back by a 1" square piece of wood running the width of the cover making a nice top vent. 95* today and no bearding.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads