Results 1 to 20 of 25

Hybrid View

  1. #1
    Join Date
    Oct 2011
    Location
    Limestone, TN
    Posts
    67

    Default Boxes won't fit.....help please...

    Hello All,
    For whatever reason I have a deep hive body that has somehow warped slightly out of shape. I used this box last year and had no problems (I run two deep brood boxes). A couple of weeks ago I split a colony and the half with the established queen is doing excellent and has filled her box nicely. I NOW need to add her second box but one corner is at least a quarter inch off so the top box rocks back and forth, not to mention it is far more than the bees can fill. Does anyone have any suggestions what I can do??? I don't feel I can move all the established frames and queen into a new box (too much disturbance for a relatively recent split) and I don't know how one would shim up something for a good fit. I'd appreciate any advice or help as I MUST get the top box on to make some room for the massive brood being produced!!!! Thanks ahead!

  2. #2
    Join Date
    Aug 2007
    Location
    Fairfield County, Connecticut, USA
    Posts
    3,589

    Default Re: Boxes won't fit.....help please...

    As a quick fix shim the box equally so you have a 1/8" gap on two sides and then run some tape around the boxes.
    BeeCurious
    Trying to think inside the box...

  3. #3
    Join Date
    Apr 2011
    Location
    Pottstown, Pennyslvania, USA
    Posts
    329

    Default Re: Boxes won't fit.....help please...

    Why not use some rubber, or foam, weatherstripping to fill in the gap?

  4. #4
    Join Date
    Aug 2007
    Location
    Fairfield County, Connecticut, USA
    Posts
    3,589

    Default Re: Boxes won't fit.....help please...

    Quote Originally Posted by DPBsbees View Post
    Why not use some rubber, or foam, weatherstripping to fill in the gap?
    Using any of the above will increase the spacing between the boxes and not be helpful, imo.
    BeeCurious
    Trying to think inside the box...

  5. #5
    Join Date
    Oct 2011
    Location
    Limestone, TN
    Posts
    67

    Default Re: Boxes won't fit.....help please...

    How would you place the shims (I'm thinking of the popsicle sticks)? If I place the top box on, three corners touch nicely, while the fourth corner would sit up about 1/4 inch (and obviously you could rock opposite corners back and forth). Standing BEHIND the behive, it is the front left corner and the rear right corner that will not stabilize. Thanks again.

  6. #6
    Join Date
    Nov 2011
    Location
    Rader, Greene County, Tennessee, USA
    Posts
    5,649

    Default Re: Boxes won't fit.....help please...

    If the choice is to not use the box or shim it, then shim it. One way that I might do that is to drive a flathead screw into the 3/4" thick edge of the box. Screw it in enough until the screw acts as leg to stop the rocking. If you then want to block the gap, screw some scrap to the outside edge of the warped box to close the gap, It may not be pretty, but it will be functional.
    Graham
    USDA Zone 7A Elevation 1400 ft

  7. #7
    Join Date
    Jun 2011
    Location
    Kenosha,WI
    Posts
    187

    Default Re: Boxes won't fit.....help please...

    Place a concrete block diagonally across the top and a bit of duck tape on the gap. The weight will take the rack out of the box shortly.

  8. #8
    Join Date
    Sep 2011
    Location
    Santa Rosa County, Florida
    Posts
    386

    Default Re: Boxes won't fit.....help please...

    What Roger said except that I would use two blocks.In other words,warp it back into level.

  9. #9
    Join Date
    Aug 2007
    Location
    Fairfield County, Connecticut, USA
    Posts
    3,589

    Default Re: Boxes won't fit.....help please...

    When I say "shim" I'm thinking pieces of twigs or popsicle sticks, or whatever is at hand...
    BeeCurious
    Trying to think inside the box...

  10. #10
    Join Date
    Jan 2013
    Location
    Winchester,Tn
    Posts
    16

    Default Re: Boxes won't fit.....help please...

    Quote Originally Posted by postie View Post
    Hello All,
    For whatever reason I have a deep hive body that has somehow warped slightly out of shape. I used this box last year and had no problems (I run two deep brood boxes). A couple of weeks ago I split a colony and the half with the established queen is doing excellent and has filled her box nicely. I NOW need to add her second box but one corner is at least a quarter inch off so the top box rocks back and forth, not to mention it is far more than the bees can fill. Does anyone have any suggestions what I can do??? I don't feel I can move all the established frames and queen into a new box (too much disturbance for a relatively recent split) and I don't know how one would shim up something for a good fit. I'd appreciate any advice or help as I MUST get the top box on to make some room for the massive brood being produced!!!! Thanks ahead!
    DUCT TAPE!!!! Too the rescue!

  11. #11
    Join Date
    Mar 2012
    Location
    Grand Junction, Colorado, USA
    Posts
    231

    Default Re: Boxes won't fit.....help please...

    I would verify which box is the culprit and if your bottom box is warped then it is possible it is due to the bottom board. The weight on top will work but you might need to shim from underneath bottom board to get all boxes back into square. If it is just the bottom box then the top box with weight will realign without warping your top box if you distribute the weight evenly on the top.
    Jack Moore ~ Sticky Bear Apiary
    Zone 7a ~ Elev: 4840ft. ~ https://www.facebook.com/StickyBearApiary

  12. #12
    Join Date
    Sep 2012
    Location
    Casey, Il, USA
    Posts
    943

    Default Re: Boxes won't fit.....help please...

    Use some drywall tape so it ventilated but will keep bees from entering/ robbing if your bees don't like it they will close it up

  13. #13
    Join Date
    Aug 2002
    Location
    Nehawka, Nebraska USA
    Posts
    45,329

    Default Re: Boxes won't fit.....help please...

    A couple of concrete blocks on the cover will usually set it down flat and it will warp back into shape over time.
    Michael Bush bushfarms.com/bees.htm "Everything works if you let it." ThePracticalBeekeeper.com 40y 200h 37yTF

  14. #14
    Join Date
    Nov 2008
    Location
    Farmington, NM
    Posts
    734

    Default Re: Boxes won't fit.....help please...

    Quote Originally Posted by Michael Bush View Post
    A couple of concrete blocks on the cover will usually set it down flat and it will warp back into shape over time.
    ratchet staps work too.
    Plant Hardiness Zone 6B, 5300 ft., Bee Zone A/B, Proverbs 24:13
    https://www.facebook.com/mobileprotection#!/2RBeeFarm

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads