Results 1 to 3 of 3

Hybrid View

  1. #1
    Join Date
    Mar 2013
    Location
    Indianapolis, IN, USA
    Posts
    2

    Default Making Top Bars using Grr-Ripper

    I wanted to be able to give something back to the community. If you are making
    your top bars, you should look at getting this Grr-Ripper It works great. I
    had made some mistake. Regardless I needed to rip the flatbars on my tablesaw.
    With the Grr-Ripper I was able to do that.

    I posted a video of the action.
    http://youtu.be/ZBua7S1Yzh4

    I hope that this will help someone.
    Matt

  2. #2
    Join Date
    Apr 2013
    Location
    Vashon Island, WA, USA
    Posts
    11

    Default Re: Making Top Bars using Grr-Ripper

    Thanks Matt,
    Had a few close calls with my improvised "push stick". I need one of these......
    am

  3. #3
    Join Date
    Mar 2013
    Location
    Indianapolis, IN, USA
    Posts
    2

    Default Re: Making Top Bars using Grr-Ripper

    Yes, I had the same issue. So when I figured out that I had to re-rip them, I knew my push stick with featherboard was not the right answer. It works great, a tad expensive, but works great for this.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads