Results 1 to 14 of 14

Hybrid View

  1. #1
    Join Date
    Oct 2012
    Location
    Greencastle, PA., USA
    Posts
    13

    Default First Install, Room For Improvement

    Bees were picked up in GA. Sat. 4/6/13 about 6:30 AM, I went over Sunday morning to the guys house and got my 2packages.
    Sunday 4/7/13, 60* some wind, new med 8 frame, used jacket and veil, no gloves.
    I sprayed #1 package, must not been enough because boy they were mad at me.
    6 stings on the hands and 1 on the leg. Trying to get the gloves on was a circus.
    #2 package went a lot better, I guess to much spraying, to install the rest of the frames on #2 it took a long time
    for the bees to get out of the way. I was afraid I created a carmel popcorn ball. I also sprayed the foundations as installing.
    I took the cork out of the candy side but didn't poke a hole tru the candy, I held the Q cage with a rubber band, cage horizontal screen up.
    Now after the install I put mason pint jars with 7 or 8 holes drilled .040 dia. # 60 bit in the lid over the round hole
    in the inner cover.
    I could not find qt. size and the pt. fits with medium super. Monday 8th (today) I had to fill up with more sugar water.
    There seems to be more dead bees outside hive 1 then hive 2, maybe they can't get the popcornball out the small entrance hole.
    I put water about 30' away, someone said if you put it next to the hives they won't use it. The neighbors pool is about 400' away.

    Now...when do I check on the Queen what do I look for and whats my next step.
    I guess I should change my handle to...2 bee...

  2. #2
    Join Date
    Dec 2012
    Location
    Sacramento, CA, USA
    Posts
    1,586

    Default Re: First Install, Room For Improvement

    How do you change your handle? I don't know how, help.
    Yes, you should check on the queen after 5 days. This is not a standard only my own experiences in case you
    want to know. Whether or not I check depends on how I feel the hive is doing after installation. Like are they
    bringing in nectar and pollen? How busy are they at hive activity and general moods.
    On a hive check, you are looking for eggs and if your queen not mark then don't even bother with that. Hard to find her now.
    The next step is to FEED FEED FEED some more.

  3. #3
    Join Date
    Dec 2012
    Location
    Sacramento, CA, USA
    Posts
    1,586

    Default Re: First Install, Room For Improvement

    dups

  4. #4
    Join Date
    Apr 2012
    Location
    Arlee MT USA
    Posts
    548

    Default Re: First Install, Room For Improvement

    Check to see if the queen has been released in two days. If she is not out by then you should remove the candy plug and carefully dump her directly into the hive. Do this right over the hive and have your hand cupped around the cage so that if she tries to fly you can gently swat her down into the hive.

    Make sure the bees are sucking down your sugar water, it should be mixed 1:1 I would put a lot more than 7 or eight holes in the lid, try 20-30.

    After the queen is released you should leave them alone for at least a week (except to refill the feeder)

    At that time check to see if any eggs have been laid.

    Its normal to see a bunch of dead bees outside the first day or two, their are usually quite a few dead bees in the package, but after the first coupe days you should never see more than three or four dead bees left outside the hive.

  5. #5
    Join Date
    Oct 2012
    Location
    Greencastle, PA., USA
    Posts
    13

    Default Re: First Install, Room For Improvement

    Thanks for the replies.
    Installed Sunday, Monday the pint jars were empty of 1:1 mix.
    Is a pint a day per hive enough to start out?
    I have top feeders (the plastic type that comes with a short super and a screen) that I would use after they get build up.
    I could try to find qt. jars and add the second med. super so I can get the top cover on.
    I take it that I should not use a smoker to check the Queen

  6. #6
    Join Date
    Jul 2011
    Location
    Evansville, IN
    Posts
    2,473

    Default Re: First Install, Room For Improvement

    Considering you got stung installing a package, a smoker would be a good idea. Typically package bees are so happy to have a real hive they ignore the big human shaking them around and dive right in.

    A pint a day is typical, and if you have a hive-top feeder I'd ditch the jar and put the hive-top on. Just put half a gallon a time in there to start with. That way you only have to go in a couple times a week, which the bees will appreciate.

    Peter

  7. #7
    Join Date
    Oct 2012
    Location
    Greencastle, PA., USA
    Posts
    13

    Default Re: First Install, Room For Improvement

    Thanks
    I put the jar over the round hole in the inner cover with out spacer sticks.
    That keeps the bees out above the inner cover, they don't seem to mind me changing jars.
    There's some that come out the hole when I take the jar off, but I get some grass and chase
    them away after I replace the jar to put the top cover on.
    If I would have had my gloves on from the getgo it would have been a better experience.
    I see youtube people installing packages in short sleeves no veil or gloves, FatBeeMan says just put liquid BBQ smoke
    on your hands, arms, face and neck.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads