Results 1 to 12 of 12

Hybrid View

  1. #1
    Join Date
    Aug 2011
    Location
    Stokesdale, North Carolina
    Posts
    45

    Default Michael Palmer nuc plans.

    I am looking for info on how to build the nuc and frame feeders MP talks about in the vids. How are the feeders sealed. I am new at bees and woodworking so any help would be great. Thanks

  2. #2
    Join Date
    Dec 2012
    Location
    Sacramento, CA, USA
    Posts
    1,261

    Default Re: Michael Palmer nuc plans.

    For the frame feeders, I use the 1" sponges. Sponge is easy to work with. Can be cut with a pair of scissors.
    Then put them together and all wrapped with a clear big plastic bag. The slit cut into the sponges will make an
    area to hold the syrup. I use a gallon plastic bag to hold the syrup in. A wick with cotton on top will drawl the
    water out for the bees to sip. This way there is not drowning of the bees. No water is leaking out either.

  3. #3
    Join Date
    Apr 2011
    Location
    greer south carolina USA
    Posts
    140

    Default Re: Michael Palmer nuc plans.

    l staple a screen to a 2 inch frame put the frame up against the tops of the mini frames then a jar with 3 very tiny holes punched in the cover. only problem the sugar eats the holes larger and covers must be replaced, when the holes get to large the sugar water runs out and kills any brood below. incites robbing also lost a queen that way!

  4. #4
    Join Date
    Aug 2011
    Location
    Stokesdale, North Carolina
    Posts
    45

    Default Re: Michael Palmer nuc plans.

    Thanks for the help. Im trying to make the feeders MP uses to divide a 10 deep into two 4 frame nucs.

  5. #5
    Join Date
    Mar 2010
    Location
    unionville,mi, USA
    Posts
    59

    Default Re: Michael Palmer nuc plans.

    There is a divided nuc with a feeder in the middle at this website, check it out and see if it is what you are looking for.

    http://www.tc.umn.edu/~reute001/Plans.html
    Your inferiority complex is better than mine.

  6. #6
    Join Date
    Apr 2007
    Location
    Northern Virginia
    Posts
    723

    Default Re: Michael Palmer nuc plans.

    Quote Originally Posted by firebug View Post
    I am looking for info on how to build the nuc and frame feeders MP talks about in the vids. How are the feeders sealed. I am new at bees and woodworking so any help would be great. Thanks
    A few years ago someone on here posted a pdf of plans. Try searching the forum or PM me and I can email it to you. I have never used it, but I do have this pdf somewhere.
    karla

  7. #7
    Join Date
    Apr 2011
    Location
    Trinity, NC, USA
    Posts
    143

    Default Re: Michael Palmer nuc plans.

    Look at Jay Smith's nucleus and feeders (page 48), they work very well!!!

    http://archive.org/stream/queenreari...ge/48/mode/2up

  8. #8
    Join Date
    Apr 2011
    Location
    Trinity, NC, USA
    Posts
    143

    Default Re: Michael Palmer nuc plans.

    My Jumbo nucleus hive with division board in center. Lower entrance for one side and top entrance for other side.

    Feeder board, can feed both nucleus.



  9. #9
    Join Date
    Feb 2013
    Location
    southwest colorado
    Posts
    133

    Default Re: Michael Palmer nuc plans.

    How do you work these nucs ? When you remove the top cover of a divided hive wont you have a good chance of queens entering the side she is not supposed to be on?

  10. #10
    Join Date
    Jun 2009
    Location
    Montgomery County, NY
    Posts
    1,359

    Default Re: Michael Palmer nuc plans.

    Not really. Your queens should be around their perspective brood nest, not malingering with another colony. Besides have you ever noticed queens try to hide from light?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads