Re: Hive Assembly Question? What Type of glue works and or what can be substituted ?
Just my own experience:
In the late '70's I built my own bee boxes using rabbit joints, nails, and Elmers wood glue. I then painted each box with a couple of coats of exterior latex paint, making sure the joints were well covered.
The boxes started falling apart in about 3 years. The paint couldn't keep the moisture out of the joint, the glue failed due to the moisture, and the nails weren't enough by themselves to keep the joints tight. This was in relatively dry southern California. I quickly realized that not using a waterproof glue was a costly and easily avoided mistake by me.
With that experience in mind, I now use the most waterproof glue I can find, Tightbond III, and stainless steel ringshank nails. I don't mind paying a few extra cents per box for the peace of mind the overkill brings. But I am a hobbiest, so the extra expense is too small for me to worry about.
I have never used Gorilla Glue on a bee box, but I have used it in other applications, and my experience is that the glue gets brittle within a few years making the joint easy to crack. Which is a shame because I like how it expands to fill voids.
(3rd year, 14 hives, Zone 5b, 5400 ft, 15.8" annual rainfall)