Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    May 2012
    Location
    Austin, Texas, USA
    Posts
    14

    Default Advice for a cut out...or two

    I have been offered two hives. One is living in the hollow section of a downed tree that has already been cut into a log and the other is in an old steel belted tire. I have done a couple of cut outs at this point and was wondering if anyone had advice about the best tool to cut open the tire. There is no rim attached and could possibly just prop it open and make the removal from there but think it would be easier if I could get more access by cutting it in half. Suggestions??

  2. #2

    Default Re: Advice for a cut out...or two

    A photo would really help for the tire. But if it is just leaning up. I would just take my cut out knife and start cutting comb.
    David

  3. #3
    Join Date
    Aug 2011
    Location
    Forsyth county, GA
    Posts
    99

    Default Re: Advice for a cut out...or two

    What us native southerners call a Sawzall....or for our northern brethren or more technically correct a reciprocating saw.

  4. #4
    Join Date
    May 2012
    Location
    Rockford, MI
    Posts
    2,678

    Default Re: Advice for a cut out...or two

    It would be easier for all involved to cut out the tire hive as is.
    Prop it open with a piece of 2x2.

  5. #5
    Join Date
    Jun 2010
    Location
    Stillwell, KS
    Posts
    647

    Default Re: Advice for a cut out...or two

    Quote Originally Posted by luke0927 View Post
    What us native southerners call a Sawzall....or for our northern brethren or more technically correct a reciprocating saw.

    I wouldn't use a sawzall on a tire because of all the vibration and especially in your area with the possably Africanized bees.

    You should be able to cut the sidewalls with a sharp utility knife, or great big metal cutting shears, to give yourself more room. You may need a pair of dikes right at the rim edge to cut through the steel cable that is located on the innermost portion of the tire where it contacts the rim. The rest of the sidewalls don't have steel in them until you get to the tread. Good luck.
    Don

  6. #6
    Join Date
    Nov 2010
    Location
    Weatherford,Texas,USA
    Posts
    452

    Default Re: Advice for a cut out...or two

    My first cut out was from a tire. Do not use a sawzall! it will get them very very angry and could possibly break lose alot of comb. What I had to use was a sharp pair of tin snips. Those worked pretty well for me.
    "It's better to die upon your feet than to live upon your knees!" Zapata

  7. #7
    Join Date
    May 2012
    Location
    Austin, Texas, USA
    Posts
    14

    Default Re: Advice for a cut out...or two

    Thanks guys, I was mostly concerned about using a sawzall and you have convinced me other wise. Will try my hand at just propping it open with minimal cutting. Thanks.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads