I'm wondering what advice you might have for treatment of knots when building gear. Some of the wood I have is pretty knotty, but they're sound. Do you just paint them, or do you have a particular approach to keeping them solid?
Definately (use good quality) primer then paint two coats. Typically they will not fall out unless the are loose from the start.
Loose ones... Titebond glue.
I tried to trim away knowts when ripping boards down and avoid getting them on the cut ends, so that assembly would be easier. The knotted areas soak up a lot more paint, so i just kept applying paint until they wouldn't soak up any more. I like the idea of squishing in some glue before painting. I wish i would have done that.
We cut all knots out andf make select boxes. Sometimes we let small knots go but we knock them out or drill them out. We use bondo(the stuff for cars) to fill.
If I come across gaps around the knots I'll mix some Titebond III with sawdust from my table saw and work it into a paste-like consistency . Then press it into the gaps. After curing, sand it smooth and paint. It makes an excellent fill and bonds the knot to the rest of the board.
Like others have said, I prefer elmers wood working glue, but yeah I slather a bunch of glue on the knots on the outside of the box, my bees tend to cap them off on the inside with propolis (maybe due to their rough texture?) and then just paint over when the glue dries. Make sure I get a good coating of paint on them is all. Haven't had any problems since.
I used latex, as this is what I had on hand, but while looking through old posts, I found comments in a few places indicating that the use of oil based was fine. I think the oil based is overlooked becasue there are no monetary savings, and it is harder to clean up, requiring chemicals, also if sprayed, it nearly always requires a thinner to be used. Furthermore, Home depot doesn;t havea shelf of "oops" oil paints
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Beesource Beekeeping Forums
1.8M posts
54.8K members
Since 1999
A forum community dedicated to beekeeping, bee owners and enthusiasts. Come join the discussion about breeding, honey production, health, behavior, hives, housing, adopting, care, classifieds, and more!