Re: Make Nuc Entrance Disc
Make sure the disc is screwed down snug enough so that it won't spin easily, especially if the entrance will be at the bottom of the disc. Cutting a hole in one side and having a solid area opposite it will create an unbalanced condition. With a loosely attached disc and the entrance hole at the bottom vibration of the hive could eventually cause the heavier solid side to rotate toward the bottom and close the entrance. It would be bad to come back in a week to a closed up box. Simply making sure the disc is snug should be good enough, I would think.
Just a thought,
Warning: Rookie beek...take my postings with that grain of salt you keep in your pocket.