Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Feb 2013
    Location
    Waller County, TX, USA
    Posts
    146

    Default Only one deep hive body for my area....confused about process.

    I did ask in the live chat, so no offense, I just need some more input. Hard for me to follow there.

    I live in Texas, zone 8b. I purchased my equipment and want to have two hives and collect some honey for ourselves. However, my kits and parts that I ordered mean I have three deep bodies and two medium hive bodies. My plan was to run the deep hive bodies until they got 7 out of 10 frames filled, then put on the excluder and put my medium super on and wait for it to fill up with honey. So...

    1.) I am now confused as to whether one deep is enough to properly keep my bees from swarming and keep honey for myself.

    2.) If it is enough, when do I put on my queen excluder and my medium honey supers if I am only running a single deep hive body??

    I asked specifically about this when I ordered my equipment, and I was told this is all I needed. But, the more I read, the more Im not so sure.

  2. #2
    Join Date
    Oct 2011
    Location
    Grayson, KY
    Posts
    274

    Default Re: Only one deep hive body for my area....confused about process.

    You need someone from your area to answer this. Our winters call for double deeps. But I put on supers when the top deep is 80% drawn.

  3. #3
    Join Date
    Nov 2011
    Location
    Rader, Greene County, Tennessee, USA
    Posts
    6,121

    Default Re: Only one deep hive body for my area....confused about process.

    Brazosdog02, welcome to Beesource!

    The answer to your questions is not cut and dried. It is likely that you will need more boxes that what you have, but the exact timing and quantity is not easy to predict.

    Spend more time on Beesource, and reading whatever you can. Join a local beekeeping club if you can. And spend some time reading Michael Bush's beekeeping website:
    http://www.bushfarms.com/bees.htm
    Graham
    USDA Zone 7A Elevation 1400 ft

  4. #4
    Join Date
    Jun 2012
    Location
    Houston, Texas, USA
    Posts
    460

    Default Re: Only one deep hive body for my area....confused about process.

    I am South of Houston and run two deeps (or 3 med. supers) for brood chambers as I would rather err or the side of plenty of room vs. maybe enough. I plan on two med. supers for harvest (above the excluder) and would add the second under the initial med. when it has 7 full. I will not pull the super until it is all capped and also run both top and bottom entrances (I will crush & strain). I just started in June of 2012 so what I have learned is from LOTS of reading. Michael Bush's resource to the right is a good one (I also bought the ebook), Beekeeping for Dummies, and lots of others. I am also going to start 2 all med super hives, 10 frame Langs., in April. Best of luck and listen to the bees.
    Mike
    N5RWH - 9a

  5. #5
    Join Date
    Oct 2011
    Location
    Edmonton, Alberta, Canada
    Posts
    663

    Default Re: Only one deep hive body for my area....confused about process.

    You will need to get the bees working above the queen excluder. Either add the first planned honey super for a week or so, to get the bees up there and working or move up a couple of frames of brood and just install the queen excluder - bees will stay with the brood.

    The last option works far better when you have all the same size frames - all deep supers or all medium supers.
    If you always do what you always did, you'll always get what you always got!

  6. #6
    Join Date
    Jun 2012
    Location
    Houston, Texas, USA
    Posts
    460

    Default Re: Only one deep hive body for my area....confused about process.

    Quote Originally Posted by mgolden View Post
    You will need to get the bees working above the queen excluder. Either add the first planned honey super for a week or so, to get the bees up there and working or move up a couple of frames of brood and just install the queen excluder - bees will stay with the brood.

    The last option works far better when you have all the same size frames - all deep supers or all medium supers.
    Good point! I have just put a med. frame in the middle of the deep brood area each of my hives to have them build out for my new hives in April (good to have comb & brood to start a hive) that are going to be all med. super hives. I just may expand this to get ready for putting my supers on, after I take the feeders off. Just make sure when you move the frame above the excluder that the queen is not on it.....
    I will be running all foundationless in my supers as I am crush and strain.
    Mike
    N5RWH - 9a

  7. #7
    Join Date
    Oct 2010
    Location
    Pueblo, Colorado, USA
    Posts
    686

    Default Re: Only one deep hive body for my area....confused about process.

    Last year I wintered 12 hives in a single deep and this year 4 in a single deep with no more problems than the hives that had more than one deep box.
    Zone 5a @ 4700 ft. High Desert
    Facebook

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads