Re: CNG- Hive Stand Height Requirement
I think you may be able to still use a handtruck. You could space out the cinderblocks to mimic the placement of the former 4x4s. Then make a riser that sits on the handtruck platform sized to slip under the hives while the riser is on the handtruck, but still lift the hives when the truck is tilted back. If you are concerned about the riser slipping, ratchet strap it to the truck.
Originally Posted by beemandan
ultracrepidarian >> noting or pertaining to a person who criticizes, judges, or gives advice outside of his expertise