Results 1 to 12 of 12

Hybrid View

  1. #1
    Join Date
    Aug 2012
    Location
    Wake County, NC
    Posts
    103

    Default Porter-Cable 2012 jig

    I got the Porter-Cable 2012 jig for Christmas. With all the discounts from Amazon, I got it for $100. It was well worth it. By the second box, I was producing a good quality box. The first one was useable but not something I would sell to anyone.

  2. #2
    Join Date
    Apr 2011
    Location
    Palermo, Maine, USA
    Posts
    731

    Default Re: Porter-Cable 2012 jig

    Excellent! Do you have the templates for through dovetails, half blind dovetails, and box joints? If so, which joint are you using on your boxes? I use the half blind dovetail because it allows me to cut both board for one joint in one pass. It also allows me to get a box out of one 6 foot length.
    Like us on facebook This is the place to bee!
    Ralph

  3. #3
    Join Date
    May 2012
    Location
    Forest grove, Ore USA
    Posts
    192

    Default Re: Porter-Cable 2012 jig

    What jig did you get? Post a link?

  4. #4
    Join Date
    Aug 2012
    Location
    Wake County, NC
    Posts
    103

    Default Re: Porter-Cable 2012 jig

    I use the through dove tail. I believe that it a stronger joint and it does not take long to cut but it does take two cuts.
    I got the jig at http://www.amazon.com/Porter-Cable-4...pr_product_top

  5. #5
    Join Date
    Apr 2011
    Location
    Palermo, Maine, USA
    Posts
    731

    Default Re: Porter-Cable 2012 jig

    I have the same jig as billybwf.
    Like us on facebook This is the place to bee!
    Ralph

  6. #6
    Join Date
    Feb 2012
    Location
    Genola, Ut
    Posts
    56

    Default Re: Porter-Cable 2012 jig


  7. #7
    Join Date
    Jan 2012
    Location
    Indianapolis IN 46227
    Posts
    285

    Default Re: Porter-Cable 2012 jig

    Quote Originally Posted by billybwf View Post
    I got the Porter-Cable 2012 jig for Christmas.
    I bought one of these a few weeks ago based on another thread here. After opening it, seeing how it works, and looking at the pile of lumber that I plan on building hundreds of boxes with this winter, I put it back in the box. It looks like a good tool to build a few boxes with, but I'm sticking with the rabbit joint for production. Rabbits on the tablesaw are just too fast & easy.

    I'd sell mine for $50 if anyone here lives around the Indy area.

  8. #8
    Join Date
    Feb 2005
    Location
    Tucson, Arizona, USA
    Posts
    5,388

    Default Re: Porter-Cable 2012 jig

    DonShackelford,

    I had a similar thought. I visited my local woodworking store to see these jigs, and how they're used. I too decided to stay with rabbet jointed boxes, cut on either my router table or dado bladed table saw. I imagine the only tool that would cut box/finger joints accurate enough, fast enough to suit my box building esthetics and need for efficiency, would be a "hauncher", like those once sold by Beebabys.com.

    One alternative, might be the locking miter joint, cut with a carbide toothed router blade on a router table. Once I can afford to set up one router table for each of the two cuts necessary for the joint, I'll be in business to make locking miter jointed boxes. The table and blade adjustments are the same, but one edge is cut with the stock vertical, and the other edge with the stock horizontal, so they need different guides to take them safely and accurately past the shaping blade. Perhaps even two shapers, one for each cut, for more power and even smoother joints, with more cuts between blade replacements.
    Last edited by Joseph Clemens; 01-02-2013 at 01:07 PM.
    48 years - 50 hives - TF
    Joseph Clemens -- Website Under Constructioni

  9. #9
    Join Date
    Apr 2011
    Location
    Palermo, Maine, USA
    Posts
    731

    Default Re: Porter-Cable 2012 jig

    Quote Originally Posted by DonShackelford View Post

    I'd sell mine for $50 if anyone here lives around the Indy area.
    If I was in the area, I'd take you up on that.
    Like us on facebook This is the place to bee!
    Ralph

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads