-
my first problem with warré beekeeping
hey this is my first time on this forum and i posted this problem in the top bar thread but im gonna post it here to coz its seems more appropriate... help me out if u can !
i have just started my first warré hive and everything thing has been going great , except due to the fact that my frames are top bar only and have no side bars to the frames the comb is being attatched to the side of the box, ( in future i think i will build with a side bar to the frames to stop this) so far this has been fine as i just loosen it with my hive tool, but being a learner (!) i didnt loosen one properly and 2/3rds of the comb has dropped off to the bottom of the box. if it was just honey comb id take it out but it has brood in it. what should i do ? take it out and let them start again? leave it and will they continue to look after the brood in the fallen comb? lets us know what u thnk !!
-
Re: my first problem with warré beekeeping
If the hive is strong I'd recommend just removing it. If they really need the extra bees you might be able to tie it to a frame like us lang guys do.
Dan
-
Re: my first problem with warré beekeeping
ok cool , they are only a young hive, but they seem to be doing well, but maybe ill see if i can tie to the frame first . thanks mate!
-
Re: my first problem with warré beekeeping
If tying it doesn't work, you can rig up a set of wire hooks to hang it from a top bar. Usually a piece of heavy gauge hardware cloth stapled with heavy duty staples and bent at an angle will work - if you cut out the horizontal wires where the comb can be pressed onto it.
-
Re: my first problem with warré beekeeping
If you don't want the combs attached to the box, change to a modified Warre with frames or a Langstroth. It is my understanding that classic Warre beekeeping is minimal intrusion, and worked by the box, not the individual comb.
-
Re: my first problem with warré beekeeping
If you really think you need it, use two hair clips and cable zip-tie them to the top bar. You can also just stand it up in the
corner or against the wall of the hive until the brood emerge, then remove it.
-
Re: my first problem with warré beekeeping
excellent, thanks everyone! i reckon ill build some modified warré frames and replace the few they havent built comb on and just be more careful with th remaining , and ill try one of the above methods to try and get the broken comb reattached
-
Re: my first problem with warré beekeeping
Its not legal here but dealing with boxes instead of frames really works. I open my bees twice a year and am giving away hives to all my fellow bee keepers that can't keep their hives alive. I think old Warre had it right.
-
Re: my first problem with warré beekeeping
yeah i don thinks its legal in australia either, how are you able to check to make sure there are no extra queen cells growing/check for disease etc, if you are only checking 2x a year? is it not a problem?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks