Results 1 to 12 of 12

Thread: bottom boards

Hybrid View

  1. #1
    Join Date
    Nov 2012
    Location
    waukomis oklahoma usa
    Posts
    3

    Default bottom boards

    This will be my first try at beekeeping. I live in nw oklahoma. the summers are hot and the winters are cold. Should I use solid bottom boards or screened bottoms? I kinda like the idea of using screened with the mite boards but don't know for sure wich to use. Thanks Archie

  2. #2
    Join Date
    Nov 2011
    Location
    Winhall, VT
    Posts
    1,066

    Default Re: bottom boards

    I like solid but have a few screened ones as well. Solid ones are just too easy to build from scrap wood and last longer.
    Raising Vermont Bees one mistake at a time.
    USDA Zone 5A

  3. #3
    Join Date
    Feb 2010
    Location
    Park City Ky
    Posts
    1,900

    Default Re: bottom boards

    archa haymaker... use the search box, upper right, enter bottom boards, or enter solid vrs screen bottom board, and you will find lots of comments on both screen and solid bottom boards to add to the ones you will get here. There are about as many that like one or the other and vice versa.

    Those threads should help you to make a decision.

    Just my two cents worth, (and likely overpriced), I like solid.

    cchoganjr
    Last edited by Cleo C. Hogan Jr; 12-19-2012 at 04:25 PM. Reason: add info

  4. #4
    Join Date
    May 2012
    Location
    Rockford, MI
    Posts
    2,667

    Default Re: bottom boards

    Just spitballing here, but once you install the mite board in a screened bottom board isn't it considered a solid bottom board? Best of both worlds.

  5. #5
    Join Date
    Nov 2011
    Location
    Winhall, VT
    Posts
    1,066

    Default Re: bottom boards

    Not really. A mite falls through the screen and is programmed to just sit there waiting for another bee to come along and attach itself. Being below the screen it can't and, without a host, it eventually dies.
    Raising Vermont Bees one mistake at a time.
    USDA Zone 5A

  6. #6
    Join Date
    May 2012
    Location
    Rockford, MI
    Posts
    2,667

    Default Re: bottom boards

    I meant you can use it in the hotter months as a screened bottom board by removing the mite board and slide the board back in to stop air infiltration in the colder months.

  7. #7
    Join Date
    Apr 2010
    Location
    Lititz, PA, USA
    Posts
    710

    Default Re: bottom boards

    Quote Originally Posted by Keth Comollo View Post
    Not really. A mite falls through the screen and is programmed to just sit there waiting for another bee to come along and attach itself. Being below the screen it can't and, without a host, it eventually dies.
    I'm not sure that's true. I remember in ABJ or BC a year or two ago reading an article by a researcher that had assumed the same thing, that mites really don't go very far. He had a bunch of mites in an open container on the floor or something a few feet away from his desk, and eventually felt them crawling on his leg (I think that was the story). Anyway, lesson is that mites will go a lot farther than you think to get back on a bee. The screened bottom and mite board mite provide some physical barrier in that the mite can't climb back into the hive, but maybe it can. Of course it can't if it's stuck in vaseline or something sticky.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads