I would like to ask - do you have some very special kind of sealer? I bought one usual sealer, that is usually offered here in Europe, but it does not seal my straws normally - they are leaking. Maybe the problem is in improper wattage - I have a 300W unit.
Or maybe I need some special straws? I have tried several types of cocktail straws, but with none I have succeeded to have non leaking straws... Could you give some comment on that, please!!!
Last edited by Lynx Hive; 01-20-2013 at 08:31 AM.
300 watt is not enough for what your doing. I recommend at least a 750 watt unit and a good tip is that when you seal........have it set pretty high and hold the sealer down for several seconds after the sealer turns off to set teh seal in place. Firm pressure is needed to complete the seal. Good luck to you.
You may be too thin skinned to be an inventor. But then again, maybe not. I've invented a dozen products and sold the patents of a few.
Most of the best "upgrades" I received was from a different set of eyes seeing the product from a different view. Critics are your best friends in this business as you just witnessed from BC.
I have another idea that will literally be worth millions. That's just for the patent.
By the way - how much that 750 W sealer costs in USA? If I won't be able to get one in Europe, I will have to buy one from USA, and maybe even together with your system. Thanks!
I have the sealer i recommend for sale on my site www.honeystickmachine.com i wish you luck in your endeavor and if you have any questions dont hesitate to pm me on here.
Question regarding honey sticks! We have managed to tune our impulse sealer to get those straws sealed without leaking. Now the question is - how do you trim them so that straws are easy to open without scissors? You should be able to pop the straw opened just with a slight pressure with fingers or by a bite with teeth. If you don't trim the straw, it is almost impossible to open it with teeth or fingers. Any suggestions? Thanks in advance!
Who owns one of these??
This thread is an old ghost from 2012
If it does work I'd like to see a you-tube
TommyT - owns what?
Yes, thread is old, but issues and questions still important! And it looks like there is still only few (1-2?) companies in the world (and I don't mean China) who has managed to solve this tricky straw filling / sealing / trimming task. If you have any advice, I'd be glad to hear! I am from Europe, so I won't be a competitor on your local market in USA. Thanks!
In order to be patentable, the idea has to be novel (new), and not 'obvious for someone skilled in the art'.
All the patent does is give you the right to sue someone for violating it...then the fun begins.
When I was working on a patent (for a new mechanism for the saxophone) it was before some of the biotech patenting took off, but something like 2/3 of the patents that had been awarded and challenged (meaning the patent was violated and the owner sued) were found to be unpatentable in court.
In some fields $20k is about right, but in many fields one need not spend so much...it really depends on what you are going to do with the patent (use it and defend it, or sell it to a very large company and let them defend it with their team of lawyers).
In my case, I got reasonably far into the process (I did the patent search myself,which required me to go to Albany to physically look through volumes of patents...this saved me money, and I doubt you would have to go to a physical library to do that today), it helped get me a job, and I decided that if anyone was going to violate the patent, it would likely be Yamaha, and they were unlikely to buy my patent, and I would be unlikely to match their lawyer power.
One of the most interesting modern patents was the intermittent windshield wiper...everyone violated it because they didn't consider it patentable, but the courts disagreed, and the owner made out like a bandit!
“Siri, tell Amazon to drone me a beer.” -Homer Simpson
I read a book by the guy who came up with the "Pet Rock". His summation of a patent... An invitation to a law suit.