Re: Cheaper Wood?
I am not sure you must use a moisture meter. after a while you can pickup a board and have a good idea if it is dry enough or not. It becomes a matter of to wet or dry enough rather than a moisture reading.
Warping not nearly as much of an issue in short boards. Cupping is more likely in wider boards but that one is easy to look at the end grain and see if it is likely to cup a lot or a little. All wood warps expands and contracts. The issue is how much
A rule of thumb in drying time for green wood is one year per inch of thickness. a 3/4 inch by 12 inch wide board would then need to be stacked to dry for 9 months. It takes about 2 here because it is so dry. faster drying cracks more wood. You can do the same thing in a kiln in a few days. A microwave can dry wood in minutes. I've done it and it is very interesting to do. you can actually see the wood warping, shrinking etc as it dries. Quick lesson in what to expect for any sort of grain as it dries.
Significant Minority vs Insignificant Majority, 20% of causes produce 80% of the effects.