Results 1 to 11 of 11

Hybrid View

  1. #1
    Join Date
    Oct 2011
    Location
    Grayson, KY
    Posts
    286

    Default Question for those building your own oxalic vaporizers

    Would any of you guys be interested in a premade cup for your homemade vaporizers? I have a place to get one made but if I buy a few in quantity I can get much better prices? I was planning on a design similar to some of those on the market. I have some numbers that are supposed to be from a commercial unit but could anyone suggest a better size? Hoping to keep the price under $30. Or maybe someone could give me a better idea for a design and I will forget the whole thing. I made one from thin sheet but it won't heat up over the whole area only near a thick sleeve I used for contact with the glow plug.

  2. #2
    Join Date
    Feb 2006
    Location
    Massillon, Ohio
    Posts
    3,430

    Default Re: Question for those building your own oxalic vaporizers

    You can buy a replacement heater from Heilyser Technology for $30 + shipping. Not sure if a homemade one would be that much of a savings to make it worthwhile.

    http://www.members.shaw.ca/orioleln/orderform.html
    To everything there is a season....

  3. #3
    Join Date
    May 2011
    Location
    Algoma dr. Ontario, Canada
    Posts
    986

    Default Re: Question for those building your own oxalic vaporizers

    Quote Originally Posted by Mike Gillmore View Post
    You can buy a replacement heater from Heilyser Technology for $30 + shipping. Not sure if a homemade one would be that much of a savings to make it worthwhile.

    http://www.members.shaw.ca/orioleln/orderform.html
    Mike, one would have to check for sure but I think that would be just the glo plug (heater) part of the vaporizer. If that is the case they are available in auto parts stores for 10 - 20$. The pan and receptacle for the glow plug is the key and most exacting part of the unit.

  4. #4
    Join Date
    Feb 2006
    Location
    Massillon, Ohio
    Posts
    3,430

    Default Re: Question for those building your own oxalic vaporizers

    I purchased a replacement in years past when I used a Heilyser and it included the aluminum bowl as well.
    To everything there is a season....

  5. #5
    Join Date
    May 2011
    Location
    Algoma dr. Ontario, Canada
    Posts
    986

    Default Re: Question for those building your own oxalic vaporizers

    Sorry Mike, Glad to hear that price includes the bowl. It looks like a decent product and price.

  6. #6
    Join Date
    Feb 2006
    Location
    Massillon, Ohio
    Posts
    3,430

    Default Re: Question for those building your own oxalic vaporizers

    It's a pretty good unit to start out with. I can be a bit on the frugal side at times, and initially toyed with the idea of building one myself to save a few bucks. The more i looked into it I realized the importance of hitting a correct target temperature when vaporizing and thought it best to not take any chances. If I was running a large operation, and needed a number of them, then it might make sense to experiment with building them myself to cut costs. But needing only one or two units I decided to just go with a commercial product that was guaranteed to work properly. I'm saving money on the woodworking side, but this would have been uncharted territory for me. I'm not meaning to discourage anyone from building their own, but this was not something that I wanted to pursue.
    To everything there is a season....

  7. #7
    Join Date
    May 2012
    Location
    DFW area, TX, USA
    Posts
    1,100

    Default Re: Question for those building your own oxalic vaporizers

    Quote Originally Posted by Mike Gillmore View Post
    I purchased a replacement in years past when I used a Heilyser and it included the aluminum bowl as well.
    I received two glow plugs without bowls from H Tech today....Had ordered hoping for two bowls. Posted here so others don't have the same experience without a heads up. Mike, if you have some extra bowls, please let me know.
    LeeB
    I try to learn from my mistakes, and from yours when you give me a heads up :)

  8. #8
    Join Date
    Aug 2011
    Location
    KC, MO, USA
    Posts
    1,219

    Default Re: Question for those building your own oxalic vaporizers

    I made mine with a spare piece of copper pipe rolled one end and flattend with a hammer, took 2 min to make.

  9. #9
    Join Date
    May 2012
    Location
    DFW area, TX, USA
    Posts
    1,100

    Default Re: Question for those building your own oxalic vaporizers

    Quote Originally Posted by FlowerPlanter View Post
    I made mine with a spare piece of copper pipe rolled one end and flattend with a hammer, took 2 min to make.
    Please post a picture.
    LeeB
    I try to learn from my mistakes, and from yours when you give me a heads up :)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads