Results 1 to 20 of 45

Hybrid View

  1. #1
    Join Date
    May 2009
    Location
    Hampstead, NC USA
    Posts
    609

    Default Bee smoker modifications???

    I am wondering what others may do to their smokers to make them better.
    Personally I've made a longer snout on mine that is a heavier gauge material. It is extremely handy when lifting a corner of a heavy hive body or honey super. I have to be careful there is no chance of a box sliding off and causing a huge number of angry bees. Understand this has never happened to me. Nor have I ever dropped a box, frame full of bees, a hive tool to the bottom of a hive box or accidentally killed a queen. Believe that.
    What I do is get one corner loose and only one corner. This prevents (um...most of the time) the box from becoming a slider. I get it high enough to put the smoker snout under it and then I can relay without holding a lot of weight to get the rest of the box loose. It does require the box to be lifted higher than normal.
    Just asking.
    Thanks
    Howard

  2. #2
    Join Date
    May 2010
    Location
    Hampton CT
    Posts
    360

    Default Re: Bee smoker modifications???

    I guess that I have been in the dark for 32 years. I never knew that my smoker needed improvement.

  3. #3
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    28,282

    Default Re: Bee smoker modifications???

    challenger, maybe you should put your smoker down for a while. Pry the boxes apart and shoot some smoke in between them and then put the smoker down again before lifting the box completely off.

    I have known persons who have attatched a short peice of copper pipe to the nozzle of the smoker, similar to what you wrote.
    Mark Berninghausen
    The answers are the end. The questions are the journey. Journey on.



  4. #4
    Join Date
    Nov 2008
    Location
    Farmington, NM
    Posts
    742

    Default Re: Bee smoker modifications???

    I took a soup can and put lots of holes in it. Then I put the material to be burned in the can, drop it in the smoker, and light it. Using the can helps with clean up and keeps the bellow hole (where it goes into the smoker) free and clear of debris; and an easy why to remove the fuel when you are finished with it. I have two smokers I did this to a few years ago....one Mann Lake and the other is a Dadant.
    Plant Hardiness Zone 6B, 5300 ft., Bee Zone A/B, Proverbs 24:13
    https://www.facebook.com/mobileprotection#!/2RBeeFarm

  5. #5
    Join Date
    Mar 2010
    Location
    Sherman, CT
    Posts
    20

    Default Re: Bee smoker modifications???

    Im with you Adam on that one....Heck, most of the time my smoker never even makes it out of the truck.

  6. #6
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    28,282

    Default Re: Bee smoker modifications???

    Quote Originally Posted by challenger View Post
    I am wondering what others may do to their smokers to make them better.
    I don't do anything. I have seen what others have done and admired them for it. Soldering a piece of copper tubing about 1 inch long to the nozzle. I just never considered that I needed to make any modifications.

    What do you do w/ your smoker when you need both hands?
    Mark Berninghausen
    The answers are the end. The questions are the journey. Journey on.



  7. #7
    Join Date
    Oct 2011
    Location
    Sheboygan, WI, USA
    Posts
    127

    Default Re: Bee smoker modifications???

    Quote Originally Posted by sqkcrk View Post
    What do you do w/ your smoker when you need both hands?
    Use a German bee pipe (imkerpfeife), you can hold it with your mouth!
    To find out more about me go to
    www.broomsbylittlejohn.com

  8. #8
    Join Date
    Jul 2012
    Location
    Pittsburgh, PA, USA
    Posts
    138

    Default Re: Bee smoker modifications???

    Quote Originally Posted by wildforager View Post
    Use a German bee pipe (imkerpfeife), you can hold it with your mouth!
    Picture of this contraption?

  9. #9
    Join Date
    Oct 2011
    Location
    Sheboygan, WI, USA
    Posts
    127

    Default Re: Bee smoker modifications???

    Quote Originally Posted by TokerM View Post
    Picture of this contraption?
    Sure, check out this link.... http://www.op-online.de/bilder/2009/...q0U;2fPkyD.jpg

    Also there's a good thread about a video series that has beeks using the bee pipe here....
    http://www.beesource.com/forums/show...ht=imkerpfeife
    To find out more about me go to
    www.broomsbylittlejohn.com

  10. #10
    Join Date
    Mar 2012
    Location
    santa monica, ca
    Posts
    175

    Default Re: Bee smoker modifications???

    Quote Originally Posted by TokerM View Post
    Picture of this contraption?
    http://www.ebay.com/itm/Vintage-Germ...item1e70977b50
    Buzz Abbott
    USDA zone 11a, Western Garden zone 24 (75 ft elev. n34.0w118.47)

  11. #11
    Join Date
    Nov 2009
    Location
    Manning, SC
    Posts
    2,483

    Default Re: Bee smoker modifications???

    I used something that looked like that back in college, but it had nothing to do with beekeeping!
    Last edited by snl; 08-01-2012 at 09:18 PM.

  12. #12
    Join Date
    Nov 2011
    Location
    Winhall, VT
    Posts
    1,066

    Default Re: Bee smoker modifications???

    Quote Originally Posted by wildforager View Post
    Use a German bee pipe (imkerpfeife), you can hold it with your mouth!
    How doe that work with a veil on?
    Raising Vermont Bees one mistake at a time.
    USDA Zone 5A

  13. #13
    Join Date
    Jul 2008
    Location
    OKC, OK USA
    Posts
    2,870

    Default Re: Bee smoker modifications???

    Small hole in the front of the veil according to a guy that uses one.
    Mike Forbes
    Red Dirt Apiaries

  14. #14
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    28,282

    Default Re: Bee smoker modifications???

    Why would I want to take up another bad habit?
    Mark Berninghausen
    The answers are the end. The questions are the journey. Journey on.



  15. #15
    Join Date
    Jan 2009
    Location
    Bristol,MA,USA
    Posts
    733

    Default Re: Bee smoker modifications???

    Quote Originally Posted by sqkcrk View Post
    What do you do w/ your smoker when you need both hands?
    Just get into the habit of holding it between your knees. You'll develop the habit in no time, so as you are going through all your 20 to 30 apiary hives, it is always with you. It saves quite a bit of time. OMTCW

  16. #16
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    28,282

    Default Re: Bee smoker modifications???

    Quote Originally Posted by Cedar Hill View Post
    Just get into the habit of holding it between your knees. You'll develop the habit in no time, so as you are going through all your 20 to 30 apiary hives, it is always with you. It saves quite a bit of time. OMTCW
    As I do at times. I was asking challenger what he does, not seeking ideas for what I should do. I do all sorts of things such as that and put it on top of another hive. But thanks.
    Mark Berninghausen
    The answers are the end. The questions are the journey. Journey on.



  17. #17
    Join Date
    Apr 2012
    Location
    North Pole, Alaska
    Posts
    145

    Default Re: Bee smoker modifications???

    should there bee a connector between the bellows and the canister? Mine doesnt have one and its a royal pain to keep lit. If I prop the lid open just a tad she goes like a forest fire....I typically use burlap....using either the man lake starters or more recently some leaves.

  18. #18
    Join Date
    Oct 2011
    Location
    Santa Monica, CA, USA
    Posts
    1,544

    Default Re: Bee smoker modifications???

    Mark
    Your mail-box at beesource is full- you need to delete some messages. Sergey

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads