Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2012
    Location
    Hamburg, Germany, Europe
    Posts
    5

    Post My first swarmtrap

    Hey there!
    I am trying to catch a swarm to start beekeeping, but i have almost no budget. So this is my first documented swarmtrap construction:

    First of course, and it is not pictured here, i got me a hive, some wooden frames and some beeswax foundations.
    As i am using the German standard frames (Deutsch Normalmass DNM), i looked for a container, that could hold frames (a colony on frames is easier to transfer into the hive).
    I found this awesome fitting cardbord box:


    So i started cutting two strips of wood, so that they could be used to mount the frames onto:


    I marked inside the box where they would go best, glued and clamped them into place:


    Like this, they are holding the frames:


    I cut out a second floor out of cardboard, and glued it to reinforce the bottom:


    Then i cut a foldable entrance hole into the front, that is big enough for a queen to enter and small enough to be easily defended:


    I sprinkled a little lemon grass oil into it, and filled it half with frames, which have only starter strips of foundation in them. Should give the bees an impression of a big hollow:


    The box measures 40cm x 24cm x 29cm = 27840 cubic centimeters, or 27,8 liters, except in the US, where it measures 15.7" x 9.4" x 11.4" = 7.4 gallons.
    A decent size:


    Finally, i improvised a roof from a piece of space blanket, to protect the cardboard from heavy rain:

    The sticker above the entrance has my contact information on it.

    I am not too concerned with bee space, because it is supposed to be only a temporary housing, until the swarm can be moved into its future home.

    A wooden box would probably be better... And where and how should i position the swarmtrap? Please let me know what you think!
    Last edited by Rummelsdorf; 06-23-2012 at 07:47 AM.

  2. #2
    Join Date
    Jun 2009
    Location
    Midland Michigan
    Posts
    69

    Default Re: My first swarmtrap

    I fashioned up a very similar budget swarm box out of a bankers box (cardboard) with a lid and single drawn frame and a few drops of LG oil. I poked a single hole on the side for entrance. I've tried it for 2 years and this year it worked. Came home from a weekend away to a nice sized swarm. Very easy to transfer the frames to a nuc like yours will be.

  3. #3
    Join Date
    Jun 2012
    Location
    Hamburg, Germany, Europe
    Posts
    5

    Default Re: My first swarmtrap

    Congratulations on your catch! Do you have pictures?
    Thanks for the encouraging answer!
    I'll try old comb as soon as i get some!

  4. #4
    Join Date
    Jun 2009
    Location
    Midland Michigan
    Posts
    69

    Default Re: My first swarmtrap

    I didn't snap any pictures but I did video myself swapping it over into the nuc. box just because. It took four minutes and it was cool because I just put another single frame in drawn out and reset it back up. I'm pretty sure it snagged one of my own hives that split. That's cool. I have tried setting up nucs in different spots nearby with drawn and foundation and I got a real small swarm a month ago. Tough to beat a free colony ready to go. Lemongrass oil seems to help too. Let me know if you have luck with it. Brad

  5. #5
    Join Date
    May 2002
    Location
    San Mateo, CA
    Posts
    4,893

    Default Re: My first swarmtrap

    Budget idea: just use your usual brood chambers for swarm traps and you will not have to make or buy anything extra,nor do any extra work. They will also be big enough for all but the most gigantic of swarms.

  6. #6
    Join Date
    Apr 2012
    Location
    Baytown, TX., USA.
    Posts
    651

    Default Re: My first swarmtrap

    Will I have a wax moth problem if I put comb in the trap?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads