Results 1 to 12 of 12

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    Faulkner Manitoba, Canada
    Posts
    1,696

    Default Tapers help please..dipped tricks

    Ok, so i tried my hand at dipping tapers. Until now they have been poured
    The first batch, half made it back into the melting pot...what a waste, but a learning experience
    The next two batches i am happy with and happy with the weights. They are simillar to my poured candle weights

    The question...
    When i dip them, they get these lines from the wax dripping off...not smooth. I am dipping at about 140-150 F
    I dipped 17 times for 12 inch candles.
    Then i dipped one or two more times with the temps near 172F. Some of the lines left, but not all

    Please, if someone would be so kind as to pass on a couple of tricks, I would be greatful
    Thank you
    HS.
    ps, though to take pics but was so tunnel visioned

  2. #2
    Join Date
    Jun 2009
    Location
    Stockton, CA
    Posts
    276

    Default Re: Tapers help please..dipped tricks

    I found there's a lot of different things that can affect the look of dipped tapers. The two biggest are temp. of the wax and room temperature. For us the best time to make smooth dipped tapers are in the warmer season. Also give the wax time to cool before you dip between times. If you wait to long then you'll end up with air pockets between the layers.

    Good luck!

    P.S. I really like your site. Did you do it yourself?

  3. #3
    Join Date
    Jan 2008
    Location
    Faulkner Manitoba, Canada
    Posts
    1,696

    Default Re: Tapers help please..dipped tricks

    thanks Beesohappy, and thanks for the website comments
    No I did not do the site. I had a company who was really reasonably priced do it for me. Websites.ca

  4. #4
    Join Date
    Jun 2010
    Location
    Outagamie County, Wisconsin USA
    Posts
    881

    Default Re: Tapers help please..dipped tricks

    I have dipped candles and learned from some mistakes and a little reading.
    If I remember correctly....... if the temperature is not high enough, there will be wrinkles. Also, any jarring of the candle will cause the wrinkles. Some candles that I had poured into molds were dipped weeks later into dyed wax and I did not experience any wrinkling as the wax was hot enough. It's better to prevent wrinkles than try to fix them.

    If you notice that your candles are not gaining thickness, then give them a little extra time between dipping. Also, I read this and tried it and liked sometimes dipping the hot candles into cool water to cool just a bit if the candle is too hot. Also, the water dip tends to give the last coat of wax a nice finish.

  5. #5
    Join Date
    Jan 2007
    Location
    berkshire county MA
    Posts
    1,472

    Default Re: Tapers help please..dipped tricks

    Honeyshack, did you make your own dipping rack? I'd love to see some pictures of yours and other's setups. I've been wanting to dip, but so far I'm only using molds. Just fixed up a loom and started weaving. so much to do, so little time

  6. #6
    Join Date
    Mar 2011
    Location
    Fort Worth, TX, USA
    Posts
    1,756

    Default Re: Tapers help please..dipped tricks

    I used to dip candles years ago. Used a small bathroom trash can longer than the candles, with doweling. Would dip a couple of pairs at a time, hang them in the trash can, pick up the next dowel with a couple of pairs, etc. Didn't know about the polishing trick by dipping in cold water.
    Time to be a gypsy again, 2014 will be my prep year, my bees want a better area with actual rainfall.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads