Looking for picture of square tubing hive stand

**Bigtwin** · 08-08-2011, 07:22 PM

I should have saved the link when I found it previously. I'm looking for a link to a hive stand for a single hive, constructed out of square tubing. The legs on each side were fashioned into an arch and the hive rested inside the tubing on the two cross members.

I thought I saw the pic/link within this forum but I can't find it.

**MT204** · 08-08-2011, 08:07 PM

Funny you should be looking for that as I also saw it but printed it. Went to look for it the other night and it was gone? The is the site that I saw it on and there is a picture on the left but no big picture. Hope this helps? http://saulcreekapiary.com/solar%20wax%20melter.htm

**Bigtwin** · 08-08-2011, 08:24 PM

I do remember the individual posting the pic of the square tubing hive stand mentioned his son built it.

**Charlie B** · 08-08-2011, 08:50 PM

I don't know if this is the one you saw but Saul Creek makes some really nice square tube hive stands.

http://saulcreekapiary.com/Hive%20Stand.htm

**mythomane** · 08-09-2011, 06:25 AM

Originally Posted by Charlie B

I don't know if this is the one you saw but Saul Creek makes some really nice square tube hive stands.

http://saulcreekapiary.com/Hive%20Stand.htm

Those are nice...for $300+ with shipping they ought to be!

**Charlie B** · 08-09-2011, 10:42 AM

I know, right?

If I knew how to weld I'd be rich $$$$

**mythomane** · 08-12-2011, 07:34 AM

Found these: http://cgi.ebay.com/Bee-Hive-Stand-/...item2c59e777b0

and these:
http://cgi.ebay.com/Ultimate-Bee-Hiv...item23133f3c48

**psisk** · 08-18-2011, 07:10 PM

I use an "H" frame welded to a piece of 1 1/4" pipe for mine. They can be put in the ground and a band of grease put on them to keep out ants. I have welded bars on the edge for frame holders but prefer the holder that rests on the hive. Even at that it cost about twenty bucks each in material to build and that dont include any labor.