Results 1 to 14 of 14

Hybrid View

  1. #1
    Join Date
    Jul 2009
    Location
    Chippew County, WI, USA
    Posts
    650

    Default All cutout masters, your advice is needed!!!

    I have a cut out to do and it is over an hour from my house so I need to have all the right tools with me, not back at the farm, LOL!

    Here is a pic


    They cut an opening with a chain saw early in spring when it was cold. Its in a basswood tree. I can cut the opening open more but they want to keep the tree. The opening in the pic looks bigger than it is. Its maybe 4" by 8". I could see drone brood and the rest just look like empty comb when I was there. The next did not appear to be wide but it extends up and down from opening. I am guessing its really tall and narrow. The opening is maybe a little over seven feet up.

    I need to know all the tools I need to have with me. I have never done this before but I am not scared whatsoever. Here is what I am planing on bringing now.

    -Bee vac hooked to a deep box
    -two deeps with empty frames and rubber bands for brood
    -two five gallon buckets for honey comb
    -sharp knives for cutting comb out
    -chain saw to cut open tree
    -six foot step ladder
    -bee suit, smoker, hive tool....
    -

    Im sure it cant be that simple, What else do I need or what will make my life easier!

    My plan is to cut the tree open till I find the bottom of the nest then work my way up. I am going to bring a small colony and some empty boxes to leave behind to clean up the mess of left over honey and comb in the tree.

    Thanks for any advise you can give me. This is going to cost me more in gas and time then its worth but I want the experience and pics and video for my website and bragging rights, LOL! The bees did survive one winter in that tree so ill take the genetics too. They are bright yellow bees. They dont know of any beekeeper in the area but that dont mean anything. Im sure they are only first or second generation ferals but who knows.

  2. #2
    Join Date
    Jan 2010
    Location
    Alachua County, FL, USA
    Posts
    6,914

    Default Re: All cutout masters, your advice is needed!!!

    Wedges, trees always bind when you don't have enough wedges, and a good hammer! If you could bend a piece of steel to cut comb way up, the opening does not have to be as big or compromise the strength of the tree so it kills you.
    americasbeekeeper.com
    beekeeper@americasbeekeeper.com

  3. #3
    Join Date
    Jun 2010
    Location
    Dripping Springs, TX USA
    Posts
    296

    Default Re: All cutout masters, your advice is needed!!!

    Don't forget the Bee-Quick. I sometimes I am not allowed to cut further on a tree. A hole drilled, in this case, above the hive is needed. Spray in the Bee-Quick and watch out. They will pour out of there for you. Be ready to vacuum!!!

  4. #4
    Join Date
    May 2011
    Location
    burbank,oklahoma,usa
    Posts
    44

    Default Re: All cutout masters, your advice is needed!!!

    all i do is cut open on both sides use wedges to split the rest of the way i dont cut completely then theres notyin but fast movin its all open find queen put in box and im sure you know the rest

  5. #5
    Join Date
    Jul 2009
    Location
    Chippew County, WI, USA
    Posts
    650

    Default Re: All cutout masters, your advice is needed!!!

    americasbeekeeper, please explain this piece of bent steel you speak of.

    I have never used bee-quick. Does it drive ALL bees out? Queen, drones and young bees?

    If I can cut enough of tree to be sure i have got the brood out and there should be nothing left but honey, I could just use the beequick then let the colony I bring rob the rest of the colony clean. Does that sound like a good plan?

  6. #6
    Join Date
    Jul 2009
    Location
    Chippew County, WI, USA
    Posts
    650

    Default Re: All cutout masters, your advice is needed!!!

    Also can anyone tell me what size rubber band works best so I know I dont have to buy six sizes to make sure I have what I need?

    And the bent steel you talking about. You just mean to bend a piece of steel and put an edge on it right? I think I should have access from a ladder anyway but ill make one.

    Is bee quick the kind that smells good?

    Thanks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads