Results 1 to 15 of 15

Hybrid View

  1. #1
    Join Date
    Nov 2009
    Location
    Columbia county, New York, USA
    Posts
    1,535

    Default Best diameter for round hole upper entrances?

    I'm thinking of using some upper drilled holes as the only entrance to some nuc-type starter colonies in regular hive boxes (with SBB for added ventilation).

    I know lots of people advise drilling 3/4" round holes for upper hive body entrances, which can be plugged and opened according to need, with either corks or slider doors.....but
    3/4" seems to me to be really large and may be hard for nucs to defend against robbing. Do others use smaller 'corking hole entrances' to advantage? How big do these holes really need to be to allow a good number of bees to go in and out as a main entrance without a huge area to guard against robbing?
    Did folks arrive at 3/4" for some particular reason?
    Thanks for any thoughts on this.
    The little bee returns with evening's gloom,
    To join her comrades in the braided hive... -Tennyson

  2. #2
    Join Date
    Feb 2011
    Location
    Venus, Texas, USA
    Posts
    14

    Default Re: Best diameter for round hole upper entrances?

    Well...with lots of wine corks laying around...I choose that diameter...

  3. #3
    Join Date
    Sep 2007
    Location
    Phelps Co. Missouri USA
    Posts
    856

    Default Re: Best diameter for round hole upper entrances?

    Look at a 3/4 hole now place guard bees around it, how many ?
    5-6 would have it surrounded, I believe there are a lot more guards then this in a Nuc sized hive.

    Course I've been wrong a time or two before.

    PCM

  4. #4
    Join Date
    Jan 2009
    Location
    Bowling Green, Kentucky
    Posts
    419

    Default Re: Best diameter for round hole upper entrances?

    drill the 3/4" hole and screen it on the inside then you can put a cork in the outside to close it but it does not have to be guarded.

  5. #5
    Join Date
    Nov 2009
    Location
    Columbia county, New York, USA
    Posts
    1,535

    Default Re: Best diameter for round hole upper entrances?

    Quote Originally Posted by slickbrightspear View Post
    drill the 3/4" hole and screen it on the inside then you can put a cork in the outside to close it but it does not have to be guarded.
    Thanks, but...
    I'm thinking of using some upper drilled holes as the only entrance to some nuc-type starter colonies in regular hive boxes (with SBB for added ventilation).
    The little bee returns with evening's gloom,
    To join her comrades in the braided hive... -Tennyson

  6. #6
    Join Date
    Sep 2009
    Location
    Millbury, MA, USA
    Posts
    1,931

    Default Re: Best diameter for round hole upper entrances?

    I used 7/8" upper entrances on my nucs last year. Worked well, no robbing problems and they were in the same area as some of my production hives.

  7. #7
    Join Date
    Nov 2006
    Location
    central mn
    Posts
    283

    Default Re: Best diameter for round hole upper entrances?

    jeb123 ,,,,
    Well...with lots of wine corks laying around...I choose that diameter...

    so do you brew ???? if you do have you try ed brewing honey ??? mine turned out great

  8. #8
    Join Date
    May 2009
    Location
    roswell, georgia, USA
    Posts
    720

    Default Re: Best diameter for round hole upper entrances?

    Big enough for one to get through
    EAS Georgia Certified. "Tradition - Even if you have done it the same way for years doesn't mean that it is not stupid."

  9. #9
    Join Date
    Jan 2011
    Location
    Carlsford, Indiana, USA
    Posts
    52

    Default Re: Best diameter for round hole upper entrances?

    I use 3/4" and Cabo Wabo plugs!

  10. #10
    Join Date
    Dec 2010
    Location
    Spicewood, TX, USA
    Posts
    375

    Default Re: Best diameter for round hole upper entrances?

    Quote Originally Posted by Ueli Hoffmann View Post
    I use 3/4" and Cabo Wabo plugs!
    Reposado o Anejo?

  11. #11
    Join Date
    Jan 2011
    Location
    Carlsford, Indiana, USA
    Posts
    52

    Default Re: Best diameter for round hole upper entrances?

    Sólo Añejo mi amigo, sólo Añejo!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads