Maybe, but I would hate to say yes for sure. That's a tough one. If you put a hive body in only for a few minutes they will come out with a thicker coating, were as a ten minute bath is almost unnoticable. I would use tite bond 3 glue to seal up the joints and then dip the feeders. You can see in the videos I put the glue on heavy in the corners and actually paint the corners with a brush with the glue. I let them all dry for at least 3 days then dip the hive bodys. The tite bond 3 glue is the best glue you can buy. Do a search on the forum, a lot of people like it.
Good Luck Bruce