Page 1 of 5 123 ... LastLast
Results 1 to 20 of 93
  1. #1
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Robbo's Bees - Photo Blog

    I'd like to update a thread weekly or fortnightly on whats going on @ my apiary. Bare in mind, Australia is 6 months out of season for you fella's in the states - Im smack in the middle of maintenance time here right now!!


    ------------------------------------------------------------------------

    I run about 10 hives as a hobby on the farm here (Ballina, NSW, Australia) I have a real job that lets me pay for all this - haha.

    Anyhow, just got thru making up some bottom boards - I modified them slightly for beetle captruing etc



    Knocked together 10 full depth supers, and a few lids I had lying around in the flat. I assemble everything with the crown stapler these days - no nails.



    Had to timber bog fill the holes left over from the crown stapler, then give the edges a bit of a rounding off with the sander. A coat of oil based primer (thats the white paint). All the exposed edges get 2 coats of primer. All done with a 3" wide paint brush.




  2. #2
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    This is my typical apiary in the spring / summer ( a few months back)


  3. #3
    Join Date
    Apr 2005
    Location
    Omaha, NE
    Posts
    258

    Default Re: Robbo's Bees - Photo Blog

    How come your telescoping lids are so much bigger than the hive top?
    AKA BEEMAN800

  4. #4
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    They arent a telescoping lid. I use all migratory lids on the hives that are the sane size as the super box.

    What you are seeing there is insulation on top of the lid. I live in a tropical climate. We can get 40 (104 f?) degree days and heavy rain all in the same day. Rainfall per year is 2000mm or roughly 7 feet per year. That insulation keeps the entrance a bit dryer and helps the timber joints on the boxs.

  5. #5
    Join Date
    Jan 2009
    Location
    Vernon,New York,USA
    Posts
    240

    Default Re: Robbo's Bees - Photo Blog

    i noticed an electric fence.what do you have to protect you hives from in australia
    Dwayne.S
    Westmoreland N.Y.

  6. #6
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    We have a few cows on the farm. Its just to stop them bumping into the hives, or scratching/rubbing them selves on them.

    I dont use those the entrance sealers that are a nail and some metal - the kangaroos can shut the entrances themselves!!

  7. #7
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    Bog filled and sanded slightly



    1st coat of 2, water based paint. I love having the hives green and camoflauged into the bush slightly.



    The staplers. 1 is a 6mm (1/4" crown) and the other a 12mm (1/2" crown). 6mm sizes go from 12 to 38mm. The 12mm goes from 1 1/2" to 2". I use the 2 inch ones - forget about taking the boxes apart if you make a mistake!!



    Staple sizes - a 14mm would be handy. these are the 6mm, 18 gauge ones.

    Last edited by Robbo; 06-10-2010 at 05:30 AM.

  8. #8
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    Stuff I take to the bee yard with me for an inspection. I only found out about the cool suit, and the bee-z smoker thanks to this site. Imported them to Australia, and very happy with both items. I love the internet some times...



    A few spare supers. Trying to keep in front of the game/demand for next springs busy times. The left pile is above a water/vinegar bath. These are stickies from last season. I dont use any chemcals in the storage process. I go 2 supers between metal seperators. Works ok for me.
    The piles on the right have wired frames but no foundation fitted. I fit the foundation as I need them, normally 20 at a time. I prefer the foundation sitting in a box rather than on a frame in a super in the shed.



    heres how I knock those frames together - short video

    http://www.youtube.com/watch?v=rvUe5ikCwec

    Shelving unit in my bee area in the workshop. (see the bee vac - haha - another thing I picked up fom this site)

    Last edited by Robbo; 06-10-2010 at 05:22 AM.

  9. #9
    Join Date
    Jan 2009
    Location
    Vernon,New York,USA
    Posts
    240

    Default Re: Robbo's Bees - Photo Blog

    ok i do the same thimg with a few hives i have in a pasture.some beek in this country havea problem with bears and fence in there hives.
    Dwayne.S
    Westmoreland N.Y.

  10. #10
    Join Date
    May 2009
    Location
    East Liverpool, Ohio, USA
    Posts
    162

    Default Re: Robbo's Bees - Photo Blog

    Nice group of pictures Robbo. I have watched the video before. You have a lot of nice tips.
    Thanks for sharing!
    Joe and Heidi S.

  11. #11
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    The hives have been shut down for a few weeks now. I choke down the entrance to about 2 inches



    Still knocking frames together - a quick 40 ran thru the jig one night over a beer or 2. A little each day adds up nicely.



    Im over the branding thing - hit em with water proof ink.



    Am pleased to say we are hosting this months bee club meeting at the property - I think we are as ready as we can bee - should be fun, and nice to meet up/catch up with similar minded people.


  12. #12
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    this is a piccy of the hive tour at the apiary on the weekend. Opened 2 hives and had a quick look at what was happening, and a good bit of discussion. Had roughly 31 members from the club show up for the meeting.



    the meeting part of the meeting in the afternoon.



    this diatomaceous earth isnt working for me in the winter. will be switching back to the oil instead. DE is too clumpy and in effective in the wet so far.


  13. #13
    Join Date
    Jun 2009
    Location
    Lewiston, MI, USA
    Posts
    211

    Default Re: Robbo's Bees - Photo Blog

    Your pole barn/workshop is so organized and sexy!

  14. #14
    Join Date
    Dec 2009
    Location
    Fallsburg, KY
    Posts
    302

    Default Re: Robbo's Bees - Photo Blog

    Great thread Robbo, enjoyed your video, nice work shop too!
    Mike , Proverbs 24:13-14 Eat honey, my son, for it is good; honey from the comb is sweet to your taste.

  15. #15
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    Cheers guys - yea not a lot to report here - last weekend I had a few hundred bees working a tree in flower here. Pretty cool as this week is the middle of winter. My wife is onto what type it is - will report back over the weekrnd.

    Might have a check in the hives this weekend if I get a sunny day. need to drop the oil in the hive traps.


  16. #16
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    Not a lot to report this week apairy wise.

    Put the queen excluders back in the hives 3 weeks ago, and then 7 days later checked if I had the queen in the right box. 6 from 7 were wrong, so had to juggle boxes. While I was at it, I opened up the hive entrance reducers on the bigger hives to about 60% open - we are still having cool nights,but lovely warm days.

    1st of august looks like a good time for us next year to be doing that here (last month of winter).

    I built a new hive stand as i would like to be @ 20 - 25 hives this year. Just need to paint the welds with gal paint, and water proof grease the upright legs. I should get 10 hives on there with room to remove the beetle traps between the hive bottoms.



    Gee we had a bad weekend last week, We were doing some scrub clearing and one of the guys got a bee sting on the forehead. I took him to the house and gave him a anti inflamotroy pill from my bee gear and a large glass of water. Roughly 10 minutes from the sting time he passed out in my lounge room in the house. The ambulance officers said he had a (not sure of spelling) anafilactic?? reaction. That means something like he had a sting a few years back, and the body leashes out on the follow up sting.

    he had low/poor bllod pressure and I didnt have any adrenaline or an eppy pen or anything here. NSW ambulance service got to the farm in 7 minutes (these guys a heros - fair dinkum) from in town. He spent the day in hospital being monitored and was released that afternoon, and went to work the next day!!

    Very, very frightening for me to say the least. Im not used to people getting knocked out in the garden!!! I have spoken to a few beekeepers this week, and my dad also who has done bees since the 50's and none of them say they have heard of anything like this reaction wise. Just a sign of the times I spose - dunno.


  17. #17
    Join Date
    Aug 2010
    Location
    Andover, NJ
    Posts
    14

    Default Re: Robbo's Bees - Photo Blog

    Wow, crazy events down under Robbo!! Glad to hear everything worked out OK. Thanks for sharing the photos of your yard and shop. Very nice and also quite helpful...

    Passed through Briz a few months ago, great place to visit mate.... hope to have a chance to get back down there someday.

  18. #18
    Join Date
    Jan 2010
    Location
    Gilmer,TX USA
    Posts
    1,830

    Default Re: Robbo's Bees - Photo Blog

    So you have how many hives?

  19. #19
    Join Date
    Sep 2008
    Location
    Ayer, Massachusetts
    Posts
    748

    Default Re: Robbo's Bees - Photo Blog

    Thanks for sharing, nice setup you have. Very clean and organized!
    www.maxantindustries.com
    American made Honey Processing Equipment "Built to last a lifetime"

  20. #20
    Join Date
    May 2008
    Location
    Ballina, NSW - Australia
    Posts
    227

    Default Re: Robbo's Bees - Photo Blog

    Ah cool - Brisbane CBD is about 2 1/4 hours north drive for me here. I work in between the gold coast and brisbane with my real job, but have a client or 2 in the CBD. Yea, next time your out, let us know - no dramas at all showing you around our parts.

    Im down to 9 hives ATM, and on the lookout for 10-12 more for this season. I think 20-25 would be a good number for us for this year. My wife has pledged to help out a bit more, so 20 should be a good number. I have been sold out of honey here for 10 weeks now.

    Cheers Maxant - Anytime you want to ship some of that surplus stock of yours over to us here, you let us know hey!! I love the quality gear you fella's make. Very rare these days to find such nice equipment.

Page 1 of 5 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads