Results 1 to 14 of 14
  1. #1

    Default DIY cappings spinner

    So Ive got a few extractors sitting around... Ok like 5. And I was thinking, maybe if I line one of these baskets with hardware cloth I'd have a nice cappings spinner. Anyone have some input on this?

  2. #2
    Join Date
    May 2009
    Location
    Palm Bay, FL, USA
    Posts
    2,297

    Default Re: DIY cappings spinner

    No problem if you like a good fight! That's what you'll have trying to get cappings off the hardware cloth. Then you have to get the cappings out of the extractor and into a melter. I've never seen an extractor which would make it an easy operation. Suggest you look around and buy a used one.

  3. #3
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,123

    Default Re: DIY cappings spinner

    Using an extractor for a wax spinner is no new idea. I don't know the brand name, Hubbard perhaps(?), but I have seen an extractor which one could put perferated sheet metal panels inside the basket, load w/ cappings and spin away. You will have to dig those cappings out once you are finished. Sore back on it's way.

    Before cappings spinners, some beekeepers would throw their cappings into a shed and let the bees work them over, getting all of the honey and leaving the wax. But you'd better treat for AFB if you do.

    Maybe you want to get yourself an old washing machine. Just a thought.
    Mark Berninghausen #youmatter

  4. #4
    Join Date
    Aug 2009
    Location
    Brady, washington
    Posts
    708

    Default Re: DIY cappings spinner

    Something you might want to use is a ladies garment wash bag for spining your cappings its nylon cloth and it will probly work better then hardwear cloth.
    99.99% of questions can be answered by Just reading books.

  5. #5

    Default Re: DIY cappings spinner

    Quote Originally Posted by honeydreams View Post
    Something you might want to use is a ladies garment wash bag for spining your cappings its nylon cloth and it will probly work better then hardwear cloth.
    Great idea. I was thinking nylon earlier...

    As to modifying an extractor, I wouldnt buy new stuff, I just found a commercial fabrication place here that does alot of stainless work. They basically gave me a little more than a quarter on the dollar quotes compared to the "bee suppliers" for tanks and doublewalled stuff.

    But back to extractors, I have extras, and I dont mind cutting one up. I do have a ringer washer, but it goes back and forth not in a slinging motion. technically I could probably use a press if I used a nylon bag... In the end Ill probably just use a melter, since I have a couple of those, and I like alot of honey in the foundation Im making.

  6. #6
    Join Date
    Mar 2009
    Location
    Poplar Bluff, Missouri, USA
    Posts
    2,299

    Default Re: DIY cappings spinner

    Skinner, if one of your extra extractors is a Kelley's, they make a cappings basket that fits into their extractors, converting it into a cappings spinner. I'm upgrading to a 20-frame radial this year, and took the reversible extractor baskets out of my old kelley's 2-frame reversible extractor, and popped in their basket. That might be as cost effective as having something fabricated locally. Might be worth looking into. Good luck to you, sir!
    Steven
    "If all you have is a hammer, the whole world is a nail." - A.H. Maslow

  7. #7
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,123

    Default Re: DIY cappings spinner

    Do these things get off balance and walk all over the place? Better bolt it down well Paul.
    Mark Berninghausen #youmatter

  8. #8

    Default Re: DIY cappings spinner

    Oh yea Itll be bolted pretty good. We have a good size honeyroom. I would say if I needed anything it would be a hotroom, but with all the beetles, thats probably not a good idea... Oh well.

    Thanks for the ideas everyone!

    Mark if you come up or down 95, my workshop(s) are 30 minutes or less from 95, off exit 49.

  9. #9
    Join Date
    Dec 2005
    Location
    Brasher Falls, NY, USA
    Posts
    27,123

    Default Re: DIY cappings spinner

    I'll keep it in mind. But the only time I get off of 95 is to get fuel or to get sleep. I'll stop in when I have time.
    Mark Berninghausen #youmatter

  10. #10
    Join Date
    Jan 2008
    Location
    Faulkner Manitoba, Canada
    Posts
    1,697

    Default Re: DIY cappings spinner

    depending on the amount of hives you have, a good used one will pay for itself the first year.
    We bought a used maxant junior, paid about 800 for it and saved a barrel of honey last year on a 135 hives. Considering honey was $1.4 a pound and 600 pounds in a barrel...

    Ours is not bolted, it does walk like a washing machine does that is unbalanced. I just shut it off and rebalance the load.

  11. #11

    Default Re: DIY cappings spinner

    lol! But Im broke!!! Im just trying to be resourceful. We have 50ish hives, hopefully at least 250 more by the flow... I guess it would be useful. I probably need a real uncapper first... this hot knife is gonna get oooooold.

  12. #12
    Join Date
    Nov 2004
    Location
    Kirkland, WA, USA
    Posts
    1,020

    Default Re: DIY cappings spinner

    I built a cappings spinner to fit in my extractor - it worked just fine - basically just a reinforced cage with a nylon bag inside. THe nylon does NOT work by itself. It gets spinning really fast and then about the time that the honey starts flying there's a rip and cappings start spurting out.
    http://www.voiceofthehive.com - Tales of Beekeeping and Honeybees

  13. #13
    Join Date
    Sep 2008
    Location
    Ayer, Massachusetts
    Posts
    755

    Default Re: DIY cappings spinner

    Get some perforated stainless as your outer support, then line that with screen, whether it be nylon or mesh.
    Window screen works fine.
    www.maxantindustries.com
    American made Honey Processing Equipment "Built to last a lifetime"

  14. #14

    Default Re: DIY cappings spinner

    Thanks jake. Ill definitely pursue that.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads