Results 1 to 4 of 4

Hybrid View

  1. #1

    Post

    I have a cappings spinner can someone explain how to use it. it turns good when I flip the switch but how fast to add wax? how long should the wax set in the uncapping tank? thanks ken

    ------------------

  2. #2
    Join Date
    Oct 2002
    Location
    New Zealand
    Posts
    32

    Post

    With the unit I use here,putting the wax in slowly is the way to go.You will know if you're doing it to fast,the thing will start to vibrate like a washing machine out of balance.
    Hope this helps.

  3. #3

    Post

    thanks a lot. Iwanted to be sure so Idont do harm to the machine thanks again ken

  4. #4
    Join Date
    Oct 2002
    Location
    New Zealand
    Posts
    32

    Post

    forgot to mention...it may pay to break the wax up into small peices before adding it to the spinner.I have found that the smaller the lump of wax the less chance there is of putting the spinner out of wack.

    I suppose it depends on the size of your unit and just how sensitive it is to the size of the lumps. You'll find out soon enough..

    regards, jim

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ads