Type: Posts; User: MAXANT
I think you will be replacing motors frequently
I would only suggest something like
The lower the number the thicker the stainless
The higher the number the thinner
Risky, I think I just dropped one.
We don't make Mann Lakes.
They use 20 gauge, we use 18.
The entire slurry is fed into the 7000 via auger or pump.
Everything that comes from the extractor and uncapper get fed into this.
Sharpdog, there is no perforated screen on this machine, thats the...
We all weld them all on the outside, I don't even know how you could weld the inside, tight space!
No secrets, I could tell you what we use, but it won't do anyone any good, as the application method is tricky.
The tank itself must be heated to 450-500 degrees and the "product" is applied through...
I don't think my email said if you don't like it, figure out a way to get it back to your dealer.
I can send you a new basket, but would encourage you to actually try the machine first, you will see...
Possibly during the winter.
Keep checking the website
You workout? :cool:
Adding baffles is easy for us to do!
They are slotted now so they can be adjusted height wise.
$10 to install it, maybe in China!
Nope, both are the same machine. One is 20" diameter (jr) and the other is 30" Diameter (sr)
Uncap directly into or dump cap pings into.
Whatever floats your boat
Mark, Im guessing you have a chromalux heater? The new style heaters have temp hash marks on them
Most of my business is to small scale folks!
The 3100 is the peoples champ for 1-20 hives!
Buy the 2 frame hand crank, and add on to it at your leisure!...
Don't get the 2 machines mixed up.
The spin float and cappings spinners are 2 different machines.
JR/SR spinner are designed for CAPPINGS only
Spin Floats are designed for EVERYTHING
Don't forget, we have a few suppliers that STOCK our extractor.
Yes, we are very busy again this season with a 2-3 week backorder.
Fear not, our drones are working work!
Winner has been posted!
Along with credit card info :popcorn:
2 more days!
Jim I was under the impression that you had already checked these bolts?
If not, there is the problem. I would use loc tite on them as well
Need a picture
Hard to determine age without seeing it, as they have been around
For 40 yrs.
If you need to bring the handle down lower, cut the stop off the bottom of the bracket.